Agreed to all said. Numerous systems with mate 3/3s and every inverter and stacking is all fine. New hub 10:3 required.
MX CC don’t appear on the mate 3/s.
Few of my systems are on optics so can’t comment on that.
Jay
On Dec 12, 2023, at 1:15 PM, Roland Shackelford via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:
We have numerous systems, with no programing or Mate display issues, however the oldest FX series wont display correctly on Optics RE and wont allow remote programability through Optics RE.
| Roland Shackelford President / Owner NABCEP PVIP #091209-162 O 808.775.7410 | M 808.938.9239 | 45-487 Lehua St Honokaa, HI 96727 Power Solutions for Generations Renewable Energy Services, Inc. |
" Where there is integrity, there will be trust. Where there is trust, there will be an atmosphere for success." - Sadhguru
_______________________________________________List sponsored by Redwood AlliancePay optional member dues here: http://re-wrenches.orgList Address: RE-wrenches@lists.re-wrenches.orgChange listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.orgThere are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.orgList rules & etiquette:http://www.re-wrenches.org/etiquette.htmCheck out or update participant bios:http://www.members.re-wrenches.org
|
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org