Howie: Segregated load distribution. Simple, automatic.
I don’t get why they put 200 amp pass-through on an inverter that can only produce 62.5 amps. William Miller Miller Solar.com 805-438-5600 www.millersolar.com On Thu, Dec 14, 2023 at 6:37 PM Howie Michaelson via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hi all, > > I am trying to figure out best options to control loads in a Sol-Ark15k > battery backup residential system. It's been quite a few years since I've > set up an automatic load control, and never with a Sol-Ark. The Sol-Ark > will output to the main breaker panel, so no separate "backed up" panel - > all house loads will likely be on the Sol-Ark's load side. > > What do folks like to use in this type of circumstance to automatically > shed loads when the grid is down, either sequentially as the battery bank > drops down or more simply triggered by loss of grid? Are they pieces of > equipment that work specifically with the Sol-Ark? > I'd also be open to considering Fortress's Envy, if there is an option > that would work well specifically with it. > I'm interested in the range of options from simple to complicated, as long > as it is automated. All automated ideas/options appreciated. > Thanks! > Howie Michaelson > Sun Catcher > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org