Hi William, I’ve never done this but talked to the electrical/electronic engineer who did:: he took all the CT current, and voltage inputs and ran them into a small cheap Linux PC, which was easy to find support and used a common programming language. These guys only used it for a custom monitoring platform. But as output from the computer, I think you could control a couple relays that will force a transfer switch to change position, start a generator, etc.
_______________________________________________ List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org