Hello Kirk,

Does the client rely on the fully charged indicator anyway? Perhaps defeat some 
of the settings that will satisfy the targets of the Flexnet? Maybe set the 
“charged voltage” to something a few volts higher than your absorption set 
point and/or take the timer all the way up to 240 minutes? It’s definitely 
frustrating that some clients are scared to press any buttons on the Mate, even 
that Events button can intimidate apparently!

Nick
 

> On Apr 1, 2024, at 12:08 PM, Kirk Herander via RE-wrenches 
> <re-wrenches@lists.re-wrenches.org> wrote:
> 
> Hello All,
> 
> I have a customer with a OB Radian GS8048A, grid tied, which logs a "charged 
> parms met" message regularly. When it does, the event log LED on the 3s 
> starts blinking. My customer thinks it's an error, and calls me. I Wish I 
> could somehow defeat this event, and any non-error, from blinking the event 
> LED for everyone's sanity.
> 
> Charged parms met is not an error, but it's crying fire in a theater to have 
> this annoyance occurring. It happens several times a week. Is there any way 
> to keep non-errors from flashing the LED?
> 
> OB tech support is starting to have long lead times, so I am asking here 
> first. Thanks.
> 
> -- 
> Kirk Herander /  <>kirkh@vermont.solar <mailto:kirkh@vermont.solar>
> Owner|Principal, VT Solar, LLC
> Celebrating our 33st Anniversary 1991-2024!!
> dba Vermont Solar Engineering
> 802.559.1225
> 

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to