There is no issue wall mounting as long as both mounting brackets are used and the wall can support the weight. People do not read manuals and then attach to wall that cannot support the weight. On Fri, Feb 14, 2025 at 6:04 AM Jason Szumlanski via RE-wrenches < [email protected]> wrote:
> Hi all, > > Is anyone willing to share with me a picture or two of the Powerflo5 in a > stack configuration? I'm curious about best practices for battery cable > routing to busbars. > > Regarding the Powerflo16, the manual says it must be wall/floor mounted > with some of the weight supported by the floor, and not supported by the > wall alone. But there is a diagram showing vertical separation requirements > between batteries. I'm confused... Can these be wall mounted or not? > > Thanks, > > Jason Szumlanski > Florida Solar Design Group > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
