I don’t remember hearing you can’t upgrade. You could ask zonna what the board part numbers are between the 4 and the 8. I know you can turn an 8 into a 4. But the power modules would need to be same rev. And if it’s a 4048 not an A, I think it’s about impossible to find anything to work on the non A variants Good luck Jay On Nov 3, 2025, at 7:39 PM, Kirk Herander via RE-wrenches <[email protected]> wrote:
|
_______________________________________________ List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
