Hi wrenches, The Renon Xcellent Plus battery unit has a special connector that is rated for 2/0 CU battery cables, but when trying to build cable with fine-stranded copper (type MTW), it is extremely difficult to get all the strands into the connector (and is a known complaint to their tech support) Anyhow have any tips or tricks for fitting finely stranded copper conductors into this connector?
-Travis -- Travis Knipple Senior Engineer Hudson Solar Solutions LLC Rhinebeck, NY 12572 518-539-8040 x408 | [email protected] PVIP# PV-111821-013612
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
