I meant; are you using realXtend server features? 2009/3/15 Peter Tavinor <[email protected]>
> ->>> If I had router that supports using external ip from lan, then I > should be ok anyway? > yes that is correct. > > ->>>If you have your realxtend region connected to osgrid, can you use 3D > meshes, > No, only sculpted prims > > ->>>how is osgrid rendered, and avatars? > not sure what you mean by this > > > ----- Original Message ----- > *From:* Jani Pirkola <[email protected]> > *To:* [email protected] > *Sent:* Monday, March 16, 2009 4:52 AM > *Subject:* [realXtend] Re: running rex 0.4 behind Network adress > translation (NAT) > > Peter, > > your patch sounds truly interesting. Some questions: > > - If I had router that supports using external ip from lan, then I should > be ok anyway? (I know many people don't have such a router) > - If you have your realxtend region connected to osgrid, can you use 3D > meshes, and how is osgrid rendered, and avatars? > > Jani > > 2009/3/15 Gustavo Alberto Navarro Bilbao <[email protected] > > > >> In spanish we say" no importa la espera si vale la pena" some like >> "doesn't matter how long is the is worth what you get" (somebody says: >> "Does not matter if the woman waiting is very pretty"). >> >> The NAT is really a problem. Just today I configured en modrex service >> in our public server, for test using the realxtend public >> identification (http://users.realxtend.net/rexauth/Register.aspx) but >> I can't get than it works in my PC because the NAT. >> >> The other limitation is the size of the meshes than we can upload, >> because the bandwidht and memory limitations. I get uplad the Red Gate >> than you can see but not the palace. >> >> A pity because if I would get than my local modrex was accesible >> outside, with the link-region option I could connect the modrex from >> the server with the mine, and could move meshes between both. >> >> Waiting for your patch and thanks for your work. >> >> 2009/3/15 Peter Tavinor <[email protected]>: >> > >> > I have now successfully connected to a region (attached to osgrid) >> running >> > on my pc , >> > so my patch does work, in grid mode, but appears to have inventry issues >> > with standalone mode. >> > sorry the test took so long, but when i went to do it first osgrid was >> down >> > for maintanance >> > >> > >> > ----- Original Message ----- >> > From: "Gustavo Alberto Navarro Bilbao" < >> [email protected]> >> > To: <[email protected]> >> > Sent: Tuesday, March 10, 2009 11:07 AM >> > Subject: [realXtend] Re: running rex 0.4 behind Network adress >> translation >> > (NAT) >> > >> > >> > >> > I don't know if this can help, but in our hired host, changing in >> > authentication\HttpSettings.xml the adress to the private IP´s, we can >> > get be identificated. If we configure the adress with the public IP, >> > is impossible. >> > >> > (waiting for the viewer wiyh the Peter's patch ;-D ) >> > >> > ----------------------------------------------------------------------- >> > >> > 2009/3/9 Peter Tavinor <[email protected]>: >> >> I dont quite understand what you are on about, >> >> If im not mistaken this is that it is >> >> >> >> You are trying to run a region server on you lan attached to a grid >> server >> >> on the internet >> >> when you try to connct you loose comunication between your region >> server >> >> and >> >> the viewer, >> >> >> >> if that is the case the reason is because after contact the region >> server >> >> or >> >> the grid server sends the external ip address to the viewer, >> >> then the viewer sends the IP packets to your external IP address , this >> >> causes them to get dropped if your router dosnt support loopback >> >> >> >> There is no solution for this that i have been able to find, >> >> But there is good news, I have been working on a Patch to do Nat >> >> Translation >> >> in the Viewer (realXtend Viewer) It still needs a lot of testing >> >> I have attached a copy of the .Diff file for revision 1073 of realXtend >> >> viewer, The NAT extention can be found on the Network Tab of the >> >> Preferences >> >> Set the Source IP and Port to your Externat IP and Port, and set the >> >> Desternation IP and Port to yout Internat IP and Port , then hope it >> works >> >> there is currently no documentation at this stage, >> >> >> >> >> >> >> >> ----- Original Message ----- >> >> From: "Ralf Haifisch" <[email protected]> >> >> To: "realXtend" <[email protected]> >> >> Sent: Sunday, March 08, 2009 11:09 PM >> >> Subject: [realXtend] running rex 0.4 behind Network adress translation >> >> (NAT) >> >> >> >> >> >> >> >> Hi all, >> >> >> >> is anyone running a rex 0.4 on windows with NAT on a hosted server ? >> >> >> >> - server sits with private IP´s a la 19.2168.x.y >> >> - domain points to official IP 85.86.86.88 >> >> - the viewer accessing is on a DSL with a NAT-router, as well NOT >> >> shareing the IP-net used for the server >> >> >> >> Problem seems to be the avatarstorage server. If your set >> >> rex_authentication = False (so basicly use the rexserver only), it >> >> works with no problem. >> >> >> >> Very common situation for running pure opensim. >> >> >> >> >> >> But if you set rex_authentication = True, the rexserver gets stuck >> >> after initial account verification. >> >> >> >> >> >> If anyone has experience with that, would be helpful. >> >> >> >> >> >> Cheers, >> >> Ralf >> >> >> >> >> >> > >> >> >> > >> > >> > >> > > >> > >> >> >> > > > --~--~---------~--~----~------------~-------~--~----~ http://groups.google.com/group/realxtend http://www.realxtend.org -~----------~----~----~----~------~----~------~--~---
