Hello, I'm still stucked with the ports problem described below.
Daniela advised me to an adobe article (thank you Daniela) http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16631 In the adobe article is mentioned that flash media server tries out differnt ports (443 and 80) automatically, which leads to 96 % success in practice. For me it seems that Red5 is not doing this automatically. In the article is described how to set the port manually. With Red5 this works only for port 8088, which is the standard tunneling port for Red5. Since a wide number of firewalls have blocked that port, I still need to know how to use port 80 or 443. Can anyone help me? I guess most of the Red5 user have this problem, but I never found it discussed in this newsletter before?. Best Regards Falk > Hello, > > in the 'red5.properties' are all port settings. > > Can anyone help me how I change the ports, that red5 doesn't fail with > exceptions on start-up, and passes the rtmp video stream the corporate > firewalls, which mostly only have port 80 open? > > Best Regards You have to use rtmpt protocol on port 80. See this url: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16631 Regards, Daniela Remogna _______________________________________________ Red5 mailing list [email protected] http://osflash.org/mailman/listinfo/red5_osflash.org
