[redewan] UCD-SNMP Tutorial -- TOP

[Kevison Dennys Carrilho Bentes]

Title: UCD-SNMP Tutorial -- TOP

Date:	Jun 01 2000 09:24:58 EDT
From:	Kevison Dennys Carrilho Bentes <[EMAIL PROTECTED]>
Subject:	[redewan] UCD-SNMP Tutorial -- TOP

UCD-SNMP Tutorial -- Top Note: Much of this tutorial requires ucd-snmp-4.1!, so make sure you get it before running the commands found here in. Danger Will Robinson: This tutorial is not finished yet! Introduction Welcome to the ucd-snmp tutorial series. Here we hope to present to you various different tutorials that will help you learn all about the ucd-snmp package. This tutorial is not intended to be a replacement for the fine manual pages and other documentation (Frequently Asked Questions, etc). The tutorial gets more complex as you go on, so stop reading when get beyond what you really wish to know. Currently, we do assume you understand at least a little bit about SNMP. Future tutorials will be written to address this need as well, hopefully. The Tutorial The ucd-snmp command set section will teach you all about the ucd-snmp command toolset and how to use the wonderful commands like snmpget, snmpwalk, snmpset, etc... The ucd-snmp demon section (not written) will explain how to use and run your ucd-snmp snmpd and snmptrapd programs. Finally, the ucd-snmp toolkit section will get down to the nuts and bolts of using the ucd-snmp libraries to build an example SNMP application, agent mib module, and stand alone sub-agent. (Knowledge of C required). Last modified: Fri Feb 4 23:20:48 PST 2000