Bom dia, Pessoal, tudo bem?
Bom o meu problema, eu acho que é facil de ser
resolvido, eu tenho um servidor debian, e nele tenho
duas placas de rede, uma que vem do modem, de onde vem
a internet, e a outra é a placa de rede interna, da
minha rede.
e esse servidor meu fornece o ip para as maquinas da
rede. Só o meu problema agora é o seguinte.
A eth0 é a rede externa, modem da internet, onde que
lá no /etc/network/interfaces, eu coloquei como
atribuir por dhcp, por que o modem já fornece o ip,
até ai tudo bem.
A eth1 é a minha placa de rede interna, onde no
/etc/network/interfaces eu coloquei o ip fixo, onde o
ip dele é 192.168.0.2, ok por ai blz.
Então para que a minha rede, pegue o ip do minha
servidor eu tenho que configurar o arquivo dhcpd.conf,
que fica no /etc/dhcpd.conf. ai eu foi lá e configurei
o arquivo normalmente.
Mas quando eu foi iniciar o serviço ele dá o seguinte
erro:
ul 25 09:11:30 localhost dhcpd: No subnet declaration
for eth0 (10.250.253.84).
Jul 25 09:11:30 localhost dhcpd: Please write a subnet
declaration in your dhcpd.conf file for the
Jul 25 09:11:30 localhost dhcpd: network segment to
which interface eth0 is attached.
Jul 25 09:11:30 localhost dhcpd: exiting.
Bom até ai eu consegui resolver a partir da ai eu
tenho dificuldade por eu não sei como resolver isso.
Estou mandando também o meu arquivo dhcp.conf para que
vcs dão uma olhada e me diz o que pode ser.
---------------------------------
Yahoo! Search
Música para ver e ouvir: You're Beautiful, do James Blunt
----------
#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.4.2.2 2002/07/10 03:50:33 peloy Exp $
#
# option definitions common to all supported networks...
# option domain-name "fugue.com";
# option domain-name-servers toccata.fugue.com;
option subnet-mask 255.255.255.224;
default-lease-time 600;
# max-lease-time 7200;
#subnet 204.254.239.0 netmask 255.255.255.224 {
# range 204.254.239.10 204.254.239.20;
# option broadcast-address 204.254.239.31;
# option routers prelude.fugue.com;
#}
# The other subnet that shares this physical network
#subnet 204.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 204.254.239.10 204.254.239.20;
# option broadcast-address 204.254.239.31;
# option routers snarg.fugue.com;
#}
#subnet 192.5.5.0 netmask 255.255.255.224 {
# range 192.5.5.26 192.5.5.30;
# option name-servers bb.home.vix.com, gw.home.vix.com;
# option domain-name "vix.com";
# option routers 192.5.5.1;
# option subnet-mask 255.255.255.224;
# option broadcast-address 192.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# If a DHCP or BOOTP client is mobile and might be connected to a variety
# of networks, more than one fixed address for that host can be specified.
# Hosts can have fixed addresses on some networks, but receive dynamically
# allocated address on other subnets; in order to support this, a host
# declaration for that client must be given which does not have a fixed
# address. If a client should get different parameters depending on
# what subnet it boots on, host declarations for each such network should
# be given. Finally, if a domain name is given for a host's fixed address
# and that domain name evaluates to more than one address, the address
# corresponding to the network to which the client is attached, if any,
# will be assigned.
#host confusia {
# hardware ethernet 02:03:04:05:06:07;
# fixed-address confusia-1.fugue.com, confusia-2.fugue.com;
# filename "vmunix.confusia";
# server-name "toccata.fugue.com";
#}
#host confusia {
# hardware ethernet 02:03:04:05:06:07;
# fixed-address confusia-3.fugue.com;
# filename "vmunix.confusia";
# server-name "snarg.fugue.com";
#}
#host confusia {
# hardware ethernet 02:03:04:05:06:07;
# filename "vmunix.confusia";
# server-name "bb.home.vix.com";
#}
# DHCP da Rede Interna
#subnet 10.30.0.0 netmask 255.255.255.0 {
#range 10.30.0.11 10.30.0.100;
#option domain-name "fugue.com";
#option routers 10.30.0.10;
#option subnet-mask 255.255.255.0;
#option broadcast-address 10.30.0.101;
#default-lease-time 600;
# max-lease-time 7200;
#}
# DHCP da Rede Interna
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.5 192.168.0.200;
option domain-name "fugue.com";
option routers 192.168.0.2;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.0.201;
default-lease-time 600;
# max-lease-time 7200;
}
[As partes desta mensagem que não continham texto foram removidas]
A lista redewan é mantida e moderada por Gilberto Biasoto.
gbiasoto @ yahoo.com.br
------------------------------------------------
To unsubscribe email to:
[EMAIL PROTECTED]
Links do Yahoo! Grupos
<*> Para visitar o site do seu grupo na web, acesse:
http://br.groups.yahoo.com/group/redewan/
<*> Para sair deste grupo, envie um e-mail para:
[EMAIL PROTECTED]
<*> O uso que você faz do Yahoo! Grupos está sujeito aos:
http://br.yahoo.com/info/utos.html
