Hello:

I recently upgraded a computer (an old 486sx/25) on my home network to 
use RedHat Linux 5.1 (I previously had RedHat 4.1 running on it). Since 
the upgrade, initial telnet and ftp connections take a very long time to 
complete. Once connected, throughput is fine. (I don't know if this is a 
clue, but when a telnet connection has been obtained, the 'who' command 
seems to hang--it displays a the names but doesn't return to the shell 
prompt; if not remote connections are on, it works normally) Also, http 
connections to Apache are very fast, so I don't think this is a general 
network or hardware problem. I tried disabling the firewall, samba, etc. 
to determine what the slow down was. I also loaded Linux onto the other 
computer (a Pentium Pro 200) on the network (it normally runs Windows 
95) in an attempt to eliminate Windows related variables. Connecting 
from the 486 to the Pentium or from the Pentium to the 486 both 
exhibited the same behavior. Previously, under RedHat Linux 4.1, telnet 
and ftp connections happened very quickly. 

Are there some kind of configuration parameters that I need to adjust 
that have changed from 4.1=>5.1? I've looked at the RedHat Linux 
Installation Guide but didn't find what I was looking for.

Thanks,

------------------------------------------------------
Rick Hale ([EMAIL PROTECTED])



______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com


-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.

Reply via email to