Actually thanks! Heh, funny how you always figure out
your own problems right before someone tells you the
answer.
I did an strace -f on something that was giving me a problem
and I noticed it looking for ncureses libs, so I did a reinstall
of ncurses and that did it. I don't understand why this happened
though...
Thanks
-jeremy
>
> do "rpm -q ncurses" and tell us what it reports. If it doesn't report
> anything, that's your problem :-}.
>
> If that's not the problem, 'cd /usr/lib/terminfo/l' and do a 'ls -l' to
> make sure all your Linux terminfo entries are there. If you're trying to
> set it to VT100 or something, 'cd /usr/lib/terminfo/v' and do a 'ls -l
> vt*' to make sure those entries are there. If something goofed during your
> upgrade, e.g. you ran out of disk space, the whole thing may not have been
> installed.
>
> My RH 5.1 system works fine. I just dialed into it from here at work and
> did "TERM=vt100" and 'vi' etc. worked just fine. But I installed my RH 5.1
> from scratch after the initial attempt to upgrade failed. (No, don't ask
> me what failed, I did all of that at midnight after flying 1,000 miles
> from Durham NC after LinuxExpo and frankly don't remember much at all from
> that night :-).
>
> Eric Lee Green [EMAIL PROTECTED] Executive Consultants
> Systems Specialist Educational Administration Solutions
> See http://members.tripod.com/~e_l_green
>
http://www.xxedgexx.com | [EMAIL PROTECTED]
| pgp available from:
| http://www.xxedgexx.com/pgp.html
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
