Guys,

Get the X332set.tgz file from the official XFree 3.3.2
It contains XF86Setup, missing in RH51. (I started to copy/paste
this :)

Say no when it asks to use the existing config file.
Just select the card (listed Trident TGUI9680), rather than
detecting it.
And for detailed setup, you can select manually stuff, again not
leaving the server to detect it.

Also check your card's specific readme, there may be something
more there.
http://www.xfree86.org/3.3.2/trident.html
http://www.xfree86.org/3.3.2/tseng.html ?

dan

Howdy Doody wrote:
> 
> On Sat, 20 Jun 1998, Michael Hatzakis, Jr MD wrote:
> > Just upgraded to RH5.1 and have been struggling with my XF86 display server for a 
>few days now.  Anyone using a tseng TGUI series card...?  How does it work for you..? 
> Any suggestions on the following config:
> >
> > I already had RH5.0 working just great in 1024 mode with my:
> >
> > Tseng TGUI9680 card 2 meg
> > MaxTech 14" 1024 60hz non-interlaced monitor Hfreq 30-50, Vfreq 50-90
> > 486-100 system
> >
> > I tried the XF16 server and could not get it above 640x480 for anything.
> > Tried the SVGA server (which was working fine in RH5.0) but now it gives me an odd 
>viewport size and is fuzzy and craps out at the highest res.  The RH5.0 config (wish 
>I kept it) worked great.
> >
> > The portion of my XF86Config is shown below:
> 
> I'm using the same board with 1meg. My config is different since I used XF86Setup to 
>get it. But, I haven't had any luck getting more than 640x480x16
> with it. Some settings try to smoke my monitor since it keeps finding the next
> lower version ( 9660).
> 
> I also tried using a board with a CL-GD5429 with no better (and sometimes worse)
> luck. Also 1meg, I think.
> 
> Also have an old Oak Technology board with a chip that says OTI077 and another
> chip with OTIVGA and the number 5298517 on it. Nothing at all with this one.
> 
> Anybody has anything more on any of these, I'll be eternally grateful for some
> info.
> 
> --
>   PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
>          To unsubscribe: mail [EMAIL PROTECTED] with
>                        "unsubscribe" as the Subject.


-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.

Reply via email to