Okay, I've checked that. Everything looks fine, but I'm not sure what
BROADCAST is...???
[EMAIL PROTECTED]
03/31/98 10:09 PM
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
cc: (bcc: Joe Ferguson)
Subject: Re: Just can't connect (was: sendmail hangs...)
It really is starting to sound like you didn't setup networking during your
install.
/etc/sysconfig/network-scripts/ifcfg-eth0
eg.
DEVICE=eth0
IPADDR=192.168.0.2
NETMASK=255.255.255.0
NETWORK=192.168.0.0
BROADCAST=192.168.0.255
ONBOOT=yes
Pay special attention to your NETMASK
You 'should' be able to ping your router if your on the same
subnet....NETWORK. That asumes your using proper cabling. BNC is the easest
to test with as RJ45 requires a special pinout for a direct connection.
pin 3 to 1 and pin 2 to 6, the rest straight through.
Dan
At 09:51 PM 3/31/98 -0800, [EMAIL PROTECTED] wrote:
>So far, everything I know to check, and everything I've been told to
check,
>have been correct. I don't know what else to do...
>
>I can ping myself @ 127.0.0.1 AND my IP, but that's it. I can't ping my
>router, or anything else. I've swapped ports on the hub, bypassed the hub
>and connected directly to the router, and even swpped nics.
>
>I tell ya, I'm completely at a loss...
>
>Anyone have any more ideas I can try???
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
