What sort of success did you have w/ the stock kernel? On Sun, 2002-12-29 at 08:48, Glen E. Moore wrote: > Dear Friends (I hope): > > This is my third attempt at posting a request to this list. I hope that > this one makes it through. I am apparently wasting a lot of effort to > no avail. > > I don't know why, but I've been dreading this task and avoiding it like > the plague. I guess I don't want to admit how ignorant I am and ask for > help or am afraid I won't find any, but I am stumped. What is most > perplexing is that I've installed Mandrake 9.0 on this system with only > minor problems. Now going to RH 8.0 is a monumental task. > > I'm running a Sony PCG-GRX570 laptop here. You should be able to glean > more than I know about my hardware from the files I've attached to this > email. The sparse documentation that came with the the laptop revealed > that I have a Yamaha AC '97 sound card (more on that below), a Mobility > Radeon 7500 graphics card, IEEE 1394 firewire port, 3 USB ports, ACPI, a > Sony cd-rw crx810e cdrw drive and ULTRA ATA IDE controller, etc. > > First of all, my system won't boot unless I go interactive and bypass > network startup and pcmcia startup. If I bypass both of these > the system boots and runs fairly well except that I can't get online > through my ethernet connection at school. I've never had linux detect > the modem on this thing and haven't thoroughly investigated that problem > yet. Finally, my sound is broken with messages like "can't open /dev/dsp > no such device, and it hangs on shutdown while saving mixer settings. > > I am running a custom kernel based upon the "kernel-2.4.18-i686.config". > I have installed all the updates that I downloaded from the mirror, > csociety-ftp.ecn.purdue.edu, since we have a T1 connect with them. The > names of the updates are included in the file 'updates' that is > attached. I've also attached several log files and configuration files > whose names are self-explanatory. > > NETWORK PROBLEMS: > > System hangs on "initializing loopback interface". If I bypass network > startup and run 'ifup ifcfg-lo', I get the same result, i.e., > nothing--it just hangs. If I run '/etc/init.d/network status', I get > > Configured devices: > lo eth0 > Currently active devices: > lo > > I am configured for dhcp at boot, but that shouldn't hang my system > forever. I tried changing that and it still hangs at loopback ini. I > have never encountered this problem before. > > As you can see from my dmesg, I'm getting an 'oops' at boot. I'm not > sure how to interpret that or what to do. I usually get several "No IRQ > known for pin ... please try using pci=biosirq" messages. This latest > boot I passed pci=biosirq, but the unknown interrupt messages persist > without the kernel parameter suggestion. > > SOUND PROBLEMS: > > I have a Yamaha AC-XG sound card using irq 9 in windows. Linux always > detects it as an Intel AC '97 and, in fact, my laptop documentation > identifies it as a Yamaha AC '97. I've never had my cdrom play audio > cd's. Other sound events have worked with arts, and I've had ogle > playing dvd's with sound in Mandrake. I > don't recall ever getting the message "/dev/dsp: no such device" before. > > ls -la /dev/dsp > > /dev/dsp gives crw------- 1 mooreg0 root 14, 3 Aug 30 18:31 > /dev/dsp > > so, as you can see, not only is the device created but I own it as user > mooreg0. If I 'cat someWavFile.wav > /dev/dsp' I get the same error > message: > > [mooreg0@sista sysIssues]$ cat > /usr/lib/xcdroast-0.98/sound/test.wav>/dev/dsp > bash: /dev/dsp: No such device > > If anyone can help me find out how to fix this box before the next > semester of school starts I will be extremely grateful. I have to > reboot into Windows to get online right now and send this email. This > is very painful for me, so please help. I will provide more information > as needed. > > > Glen > > > ______________________________________________________________________ > > Character devices: > 1 mem > 2 pty > 3 ttyp > 4 ttyS > 5 cua > 7 vcs > 10 misc > 13 input > 14 sound > 29 fb > 36 netlink > 128 ptm > 129 ptm > 130 ptm > 131 ptm > 132 ptm > 133 ptm > 134 ptm > 135 ptm > 136 pts > 137 pts > 138 pts > 139 pts > 140 pts > 141 pts > 142 pts > 143 pts > 162 raw > 171 ieee1394 > 180 usb > 226 drm > 254 pcmcia > > Block devices: > 1 ramdisk > 3 ide0 > 9 md > 11 sr > 12 unnamed > 14 unnamed > 22 ide1 > 38 unnamed > 39 unnamed > > > ______________________________________________________________________ > > Linux version 2.4.18-18.8.0custom ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red >Hat Linux 8.0 3.2-7)) #1 Mon Dec 23 08:02:40 CST 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009e800 (usable) > BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) > BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) > BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) > BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable) > BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) > BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 511MB LOWMEM available. > On node 0 totalpages: 130944 > zone(0): 4096 pages. > zone(1): 126848 pages. > zone(2): 0 pages. > Sony Vaio laptop detected. > Kernel command line: ro root=LABEL=/ hdc=ide-scsi pci=biosirq > ide_setup: hdc=ide-scsi > Initializing CPU#0 > Detected 1590.741 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 3155.43 BogoMIPS > Memory: 510780k/523776k available (1485k kernel code, 10364k reserved, 1029k data, >140k init, 0k highmem) > Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount cache hash table entries: 8192 (order: 4, 65536 bytes) > ramfs: mounted with options: <defaults> > ramfs: max_pages=64119 max_file_pages=0 max_inodes=0 max_dentries=64119 > Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 0K, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 > CPU: Common caps: 3febf9ff 00000000 00000000 00000000 > CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > PCI: PCI BIOS revision 2.10 entry at 0xfd9ca, last bus=2 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge > PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > cpufreq: CPU#0 P4/Xeon(TM) CPU On-Demand Clock Modulation available > CPU clock: 1590.741 MHz (159.074-1590.741 MHz) > Starting kswapd > VFS: Diskquotas version dquot_6.5.0 initialized > NTFS driver v1.1.22 [Flags: R/O] > ACPI: Core Subsystem version [20011018] > ACPI: Subsystem enabled > pty: 2048 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ >SERIAL_PCI ISAPNP enabled > ttyS0 at 0x03f8 (irq = 4) is a 16550A > PCI: No IRQ known for interrupt pin B of device 00:1f.6. > Real Time Clock Driver v1.10e > block: 992 slots per queue, batch=248 > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller on PCI bus 00 dev f9 > PCI: Enabling device 00:1f.1 (0005 -> 0007) > PCI: No IRQ known for interrupt pin A of device 00:1f.1. > PIIX4: chipset revision 2 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio > hda: TOSHIBA MK4018GAS, ATA DISK drive > hdc: SONY CD-RW/DVD-ROM CRX810E, ATAPI CD/DVD-ROM drive > spurious 8259A interrupt: IRQ7. > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > blk: queue c03dd344, I/O limit 4095Mb (mask 0xffffffff) > blk: queue c03dd344, I/O limit 4095Mb (mask 0xffffffff) > hda: 78140160 sectors (40008 MB), CHS=4864/255/63, UDMA(100) > ide-floppy driver 0.99.newide > Partition check: > hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > > floppy0: no floppy controllers found > NET4: Frame Diverter 0.46 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > ide-floppy driver 0.99.newide > Linux Kernel Card Services 3.1.22 > options: [pci] [cardbus] [pm] > PCI: Found IRQ 3 for device 02:05.0 > PCI: No IRQ known for interrupt pin B of device 02:05.1. > Intel PCIC probe: not found. > Databook TCIC-2 PCMCIA probe: not found. > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > Yenta IRQ list 0cb0, PCI irq3 > Socket status: 30000006 > Yenta IRQ list 0cb0, PCI irq0 > Socket status: 30000006 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 4096 buckets, 32Kbytes > TCP: Hash tables configured (established 32768 bind 65536) > Linux IP multicast router 0.06 plus PIM-SM > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 126k freed > VFS: Mounted root (ext2 filesystem). > Journalled Block Device driver loaded > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > Freeing unused kernel memory: 140k freed > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.275 $ time 08:25:26 Dec 23 2002 > usb-uhci.c: High bandwidth mode enabled > PCI: Found IRQ 9 for device 00:1d.0 > PCI: Setting latency timer of device 00:1d.0 to 64 > usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > PCI: Found IRQ 9 for device 00:1d.1 > PCI: Setting latency timer of device 00:1d.1 to 64 > usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 9 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 2 > hub.c: USB hub found > hub.c: 2 ports detected > PCI: No IRQ known for interrupt pin C of device 00:1d.2. > usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings! > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > usb.c: registered new driver hiddev > usb.c: registered new driver hid > hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> > hid-core.c: USB HID support drivers > mice: PS/2 mouse device common for all mice > hub.c: USB new device connect on bus2/2, assigned device number 2 > usb-uhci.c: interrupt, status 3, frame# 560 > input0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical�] on usb2:2.0 > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal > Adding Swap: 522040k swap-space (priority -1) > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,8), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,7), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: SONY Model: CD-RW CRX810E Rev: 1.5a > Type: CD-ROM ANSI SCSI revision: 02 > IA-32 Microcode Update Driver: v1.11 <[EMAIL PROTECTED]> > microcode: CPU0 no microcode found! (sig=f24, pflags=8) > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] > parport0: irq 7 detected > ohci1394: $Revision: 1.101 $ Ben Collins <[EMAIL PROTECTED]> > PCI: No IRQ known for interrupt pin C of device 02:05.2. > ohci1394: Failed to allocate shared interrupt 0 > ieee1394: NodeMgr: host ohci1394 does not exist, cannot remove > Unable to handle kernel NULL pointer dereference at virtual address 00000004 > printing eip: > e08ead2a > *pde = 00000000 > Oops: 0002 > ohci1394 ieee1394 microcode ide-scsi scsi_mod ide-cd cdrom nls_iso8859-1 mousedev >keybdev hid input usb-uhci usbcore ext3 jbd > CPU: 0 > EIP: 0010:[<e08ead2a>] Not tainted > EFLAGS: 00010046 > > EIP is at hpsb_remove_host_R34144dc5 [ieee1394] 0x3a (2.4.18-18.8.0custom) > eax: 00000000 ebx: c17e0000 ecx: 00000246 edx: 00000000 > esi: c24d5e00 edi: 00000800 ebp: c2591800 esp: dd945e7c > ds: 0018 es: 0018 ss: 0018 > Process modprobe (pid: 366, stackpage=dd945000) > Stack: c17e0000 c17e14ec 00000000 e08f7fe8 c17e0000 c17e14ec c17e14ec 00000000 > c17e14ec e08f7adb c2591800 e08f919f 00000000 e08f919f c17e14ec 00001000 > 00000400 c17e0000 e08f9e00 e08f9e40 c2591800 00000000 c01e7d65 c2591800 > Call Trace: [<e08f7fe8>] ohci1394_pci_remove [ohci1394] 0x178 (0xdd945e88)) > [<e08f7adb>] ohci1394_pci_probe [ohci1394] 0x14b (0xdd945ea0)) > [<e08f919f>] .rodata.str1.1 [ohci1394] 0x0 (0xdd945ea8)) > [<e08f919f>] .rodata.str1.1 [ohci1394] 0x0 (0xdd945eb0)) > [<e08f9e00>] ohci1394_pci_tbl [ohci1394] 0x0 (0xdd945ec4)) > [<e08f9e40>] ohci1394_pci_driver [ohci1394] 0x0 (0xdd945ec8)) > [<c01e7d65>] pci_announce_device [kernel] 0x35 (0xdd945ed4)) > [<e08f9e00>] ohci1394_pci_tbl [ohci1394] 0x0 (0xdd945edc)) > [<e08f9e40>] ohci1394_pci_driver [ohci1394] 0x0 (0xdd945ee4)) > [<c01e7e0c>] pci_register_driver [kernel] 0x5c (0xdd945ef0)) > [<e08f9e40>] ohci1394_pci_driver [ohci1394] 0x0 (0xdd945ef4)) > [<e08f81ee>] ohci1394_init [ohci1394] 0x5e (0xdd945f08)) > [<e08f9e40>] ohci1394_pci_driver [ohci1394] 0x0 (0xdd945f0c)) > [<e08f919f>] .rodata.str1.1 [ohci1394] 0x0 (0xdd945f10)) > [<c011a8d9>] sys_init_module [kernel] 0x4d9 (0xdd945f1c)) > [<e08f5060>] get_phy_reg [ohci1394] 0x0 (0xdd945f20)) > [<e08f9468>] .kmodtab [ohci1394] 0x0 (0xdd945f2c)) > [<e08f5060>] get_phy_reg [ohci1394] 0x0 (0xdd945f58)) > [<c0109117>] system_call [kernel] 0x33 (0xdd945fc0)) > > > Code: 89 50 04 89 02 8b 53 04 8b 03 89 50 04 89 02 ff 4e 10 51 9d > ip_tables: (C) 2000-2002 Netfilter core team > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) > apm: overridden by ACPI. > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 439M > agpgart: Detected Intel i845 chipset > agpgart: AGP aperture is 64M @ 0xec000000 > [drm] AGP 0.99 on Unknown @ 0xec000000 64MB > [drm] Initialized radeon 1.1.1 20010405 on minor 0 > Intel 810 + AC97 Audio, version 0.22, 08:24:26 Dec 23 2002 > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > sr0: scsi3-mmc drive: 2x/24x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.12 > > > ______________________________________________________________________ > > CPU0 > 0: 4678887 XT-PIC timer > 1: 15335 XT-PIC keyboard > 2: 0 XT-PIC cascade > 3: 0 XT-PIC Ricoh Co Ltd RL5c476 II > 8: 1 XT-PIC rtc > 9: 100186 XT-PIC acpi, usb-uhci, usb-uhci > 14: 78887 XT-PIC ide0 > 15: 44353 XT-PIC ide1 > NMI: 0 > ERR: 1 > > > ______________________________________________________________________ > > 0000-001f : dma1 > 0020-003f : pic1 > 0040-005f : timer > 0060-006f : keyboard > 0070-007f : rtc > 0080-008f : dma page reg > 00a0-00bf : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0000 : Intel Corp. 82801CAM IDE U100 > 0170-0177 : ide1 > 01f0-0000 : Intel Corp. 82801CAM IDE U100 > 01f0-01f7 : ide0 > 0374-0000 : Intel Corp. 82801CAM IDE U100 > 0376-0376 : ide1 > 03c0-03df : vga+ > 03f4-0000 : Intel Corp. 82801CAM IDE U100 > 03f6-03f6 : ide0 > 03f8-03ff : serial(auto) > 0cf8-0cff : PCI conf1 > 1800-181f : Intel Corp. 82801CA/CAM USB (Hub #1) > 1800-181f : usb-uhci > 1820-183f : Intel Corp. 82801CA/CAM USB (Hub #2) > 1820-183f : usb-uhci > 1840-185f : Intel Corp. 82801CA/CAM USB (Hub #3) > 1860-186f : Intel Corp. 82801CAM IDE U100 > 1860-1867 : ide0 > 1868-186f : ide1 > 1880-189f : Intel Corp. 82801CA/CAM SMBus > 18c0-18ff : Intel Corp. 82801CA/CAM AC'97 Audio > 1c00-1cff : Intel Corp. 82801CA/CAM AC'97 Audio > 2000-207f : Intel Corp. 82801CA/CAM AC'97 Modem > 2400-24ff : Intel Corp. 82801CA/CAM AC'97 Modem > 3000-3fff : PCI Bus #01 > 3000-30ff : ATI Technologies Inc Radeon Mobility M7 LW > 4000-403f : Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller > 4400-44ff : PCI CardBus #03 > 4800-48ff : PCI CardBus #03 > 4c00-4cff : PCI CardBus #07 > 5000-50ff : PCI CardBus #07 > > > ______________________________________________________________________ > > Module Size Used by Not tainted > sr_mod 18168 2 (autoclean) > i810_audio 25224 1 (initializing) > ac97_codec 13416 0 (autoclean) [i810_audio] > radeon 93912 15 > agpgart 42944 3 > binfmt_misc 7524 1 > autofs 13348 0 (autoclean) (unused) > ipt_REJECT 3736 6 (autoclean) > iptable_filter 2444 1 (autoclean) > ip_tables 15096 2 [ipt_REJECT iptable_filter] > ohci1394 20076 1 (initializing) > ieee1394 46892 0 [ohci1394] > microcode 4700 0 (autoclean) > ide-scsi 10512 1 > scsi_mod 107176 2 [sr_mod ide-scsi] > ide-cd 33608 0 > cdrom 33728 0 [sr_mod ide-cd] > nls_iso8859-1 3516 1 (autoclean) > mousedev 5524 1 > keybdev 2976 0 (unused) > hid 22244 0 (unused) > input 5920 0 [mousedev keybdev hid] > usb-uhci 26188 0 (unused) > usbcore 77024 1 [hid usb-uhci] > ext3 70368 4 > jbd 52212 4 [ext3] > > > ______________________________________________________________________ > > # Generated by modprobe -c (2.4.18) > path[boot]=/lib/modules/boot > path[toplevel]=/lib/modules/2.4.18-18.8.0custom > path[toplevel]=/lib/modules/2.4 > path[kernel]=/lib/modules/kernel > path[fs]=/lib/modules/fs > path[net]=/lib/modules/net > path[scsi]=/lib/modules/scsi > path[block]=/lib/modules/block > path[cdrom]=/lib/modules/cdrom > path[ipv4]=/lib/modules/ipv4 > path[ipv6]=/lib/modules/ipv6 > path[sound]=/lib/modules/sound > path[fc4]=/lib/modules/fc4 > path[video]=/lib/modules/video > path[misc]=/lib/modules/misc > path[pcmcia]=/lib/modules/pcmcia > path[atm]=/lib/modules/atm > path[usb]=/lib/modules/usb > path[ide]=/lib/modules/ide > path[ieee1394]=/lib/modules/ieee1394 > path[mtd]=/lib/modules/mtd > # Prune > prune modules.dep > prune modules.generic_string > prune modules.pcimap > prune modules.isapnpmap > prune modules.usbmap > prune modules.parportmap > prune modules.ieee1394map > prune modules.pnpbiosmap > prune System.map > prune .config > prune build > prune vmlinux > prune vmlinuz > prune bzImage > prune zImage > prune .rhkmvtag > # Aliases > alias binfmt-0000 off > alias binfmt-204 binfmt_aout > alias binfmt-263 binfmt_aout > alias binfmt-264 binfmt_aout > alias binfmt-267 binfmt_aout > alias binfmt-387 binfmt_aout > alias binfmt-332 iBCS > alias binfmt--310 binfmt_java > alias block-major-1 rd > alias block-major-2 floppy > alias block-major-3 ide-probe-mod > alias block-major-7 loop > alias block-major-8 sd_mod > alias block-major-9 md > alias block-major-11 sr_mod > alias block-major-13 xd > alias block-major-15 cdu31a > alias block-major-16 gscd > alias block-major-17 optcd > alias block-major-18 sjcd > alias block-major-20 mcdx > alias block-major-22 ide-probe-mod > alias block-major-23 mcd > alias block-major-24 sonycd535 > alias block-major-25 sbpcd > alias block-major-26 sbpcd > alias block-major-27 sbpcd > alias block-major-29 aztcd > alias block-major-32 cm206 > alias block-major-33 ide-probe-mod > alias block-major-34 ide-probe-mod > alias block-major-37 ide-tape > alias block-major-44 ftl > alias block-major-46 pcd > alias block-major-47 pf > alias block-major-56 ide-probe-mod > alias block-major-57 ide-probe-mod > alias block-major-58 lvm-mod > alias block-major-88 ide-probe-mod > alias block-major-89 ide-probe-mod > alias block-major-90 ide-probe-mod > alias block-major-91 ide-probe-mod > alias block-major-93 nftl > alias block-major-97 pg > alias char-major-4 serial > alias char-major-5 serial > alias char-major-6 lp > alias char-major-9 st > alias char-major-10 off > alias char-major-10-0 busmouse > alias char-major-10-1 off > alias char-major-10-2 msbusmouse > alias char-major-10-3 atixlmouse > alias char-major-10-130 wdt > alias char-major-10-131 wdt > alias char-major-10-135 rtc > alias char-major-10-139 openprom > alias char-major-10-144 nvram > alias char-major-10-157 applicom > alias char-major-10-175 agpgart > alias char-major-10-184 microcode > alias char-major-13 input > alias char-major-13-32 mousedev > alias char-major-14 soundcore > alias char-major-19 cyclades > alias char-major-20 cyclades > alias char-major-21 sg > alias char-major-22 pcxx > alias char-major-23 pcxx > alias char-major-27 ftape > alias char-major-34 scc > alias char-major-35 tclmidi > alias char-major-36 netlink > alias char-major-37 ide-tape > alias char-major-48 riscom8 > alias char-major-49 riscom8 > alias char-major-57 esp > alias char-major-58 esp > alias char-major-63 kdebug > alias char-major-90 mtdchar > alias char-major-96 pt > alias char-major-99 ppdev > alias char-major-107 3dfx > alias char-major-108 ppp_generic > alias char-major-109 lvm-mod > alias char-major-161 ircomm-tty > alias char-major-171 raw1394 > alias char-major-200 vxspec > alias dos msdos > alias dummy0 dummy > alias dummy1 dummy > alias eth0 eepro100 > alias iso9660 isofs > alias md-personality-1 linear > alias md-personality-2 raid0 > alias md-personality-3 raid1 > alias md-personality-4 raid5 > alias md-personality-7 multipath > alias net-pf-1 unix > alias net-pf-2 ipv4 > alias net-pf-3 off > alias net-pf-4 ipx > alias net-pf-5 appletalk > alias net-pf-6 off > alias net-pf-10 off > alias net-pf-17 af_packet > alias net-pf-19 off > alias netalias-2 ip_alias > alias plip0 plip > alias plip1 plip > alias tunl0 ipip > alias cipcb0 cipcb > alias cipcb1 cipcb > alias cipcb2 cipcb > alias cipcb3 cipcb > alias ppp0 ppp > alias ppp1 ppp > alias scsi_hostadapter off > alias slip0 slip > alias slip1 slip > alias tty-ldisc-1 slip > alias tty-ldisc-3 ppp_async > alias tty-ldisc-11 irtty > alias tty-ldisc-14 ppp_synctty > alias ppp-compress-18 ppp_mppe > alias ppp-compress-21 bsd_comp > alias ppp-compress-24 ppp_deflate > alias ppp-compress-26 ppp_deflate > alias parport_lowlevel parport_pc > alias usbdevfs usbcore > alias sound-slot-0 i810_audio > alias usb-controller usb-uhci > # Options > options dummy0 -o dummy0 > options dummy1 -o dummy1 > options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 > # Commands > post-install binfmt_misc /bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > >/dev/null 2>&1 || : > pre-remove binfmt_misc /bin/umount /proc/sys/fs/binfmt_misc > /dev/null 2>&1 || : > post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : > pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : > # Miscellaneous file and directory names > generic_stringfile=/lib/modules/2.4.18-18.8.0custom/modules.generic_string > pcimapfile=/lib/modules/2.4.18-18.8.0custom/modules.pcimap > isapnpmapfile=/lib/modules/2.4.18-18.8.0custom/modules.isapnpmap > usbmapfile=/lib/modules/2.4.18-18.8.0custom/modules.usbmap > parportmapfile=/lib/modules/2.4.18-18.8.0custom/modules.parportmap > ieee1394mapfile=/lib/modules/2.4.18-18.8.0custom/modules.ieee1394map > pnpbiosmapfile=/lib/modules/2.4.18-18.8.0custom/modules.pnpbiosmap > depfile=/lib/modules/2.4.18-18.8.0custom/modules.dep > persistdir=/var/lib/modules/persist > > > ______________________________________________________________________ > > alias parport_lowlevel parport_pc > alias eth0 eepro100 > alias sound-slot-0 i810_audio > post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : > pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : > alias usb-controller usb-uhci > > > ______________________________________________________________________ > > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 4). > Prefetchable 32 bit memory at 0xec000000 [0xefffffff]. > Bus 0, device 1, function 0: > PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 4). > Master Capable. Latency=96. Min Gnt=12. > Bus 0, device 29, function 0: > USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 2). > IRQ 9. > I/O at 0x1800 [0x181f]. > Bus 0, device 29, function 1: > USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 2). > IRQ 9. > I/O at 0x1820 [0x183f]. > Bus 0, device 29, function 2: > USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 2). > I/O at 0x1840 [0x185f]. > Bus 0, device 30, function 0: > PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 66). > Master Capable. No bursts. Min Gnt=4. > Bus 0, device 31, function 0: > ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 2). > Bus 0, device 31, function 1: > IDE interface: Intel Corp. 82801CAM IDE U100 (rev 2). > I/O at 0x1860 [0x186f]. > Non-prefetchable 32 bit memory at 0xe8000000 [0xe80003ff]. > Bus 0, device 31, function 3: > SMBus: Intel Corp. 82801CA/CAM SMBus (rev 2). > I/O at 0x1880 [0x189f]. > Bus 0, device 31, function 5: > Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 2). > IRQ 9. > I/O at 0x1c00 [0x1cff]. > I/O at 0x18c0 [0x18ff]. > Bus 0, device 31, function 6: > Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 2). > I/O at 0x2400 [0x24ff]. > I/O at 0x2000 [0x207f]. > Bus 1, device 0, function 0: > VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW (rev 0). > IRQ 9. > Master Capable. Latency=66. Min Gnt=8. > Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff]. > I/O at 0x3000 [0x30ff]. > Non-prefetchable 32 bit memory at 0xe8100000 [0xe810ffff]. > Bus 2, device 5, function 0: > CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 168). > IRQ 3. > Master Capable. Latency=168. Min Gnt=128.Max Lat=5. > Non-prefetchable 32 bit memory at 0x20000000 [0x20000fff]. > Bus 2, device 5, function 1: > CardBus bridge: Ricoh Co Ltd RL5c476 II (#2) (rev 168). > Master Capable. Latency=168. Max Lat=5. > Non-prefetchable 32 bit memory at 0x20001000 [0x20001fff]. > Bus 2, device 5, function 2: > FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 0). > Master Capable. Latency=64. Min Gnt=2.Max Lat=4. > Non-prefetchable 32 bit memory at 0xe8201000 [0xe82017ff]. > Bus 2, device 8, function 0: > Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller >(rev 66). > IRQ 9. > Master Capable. Latency=66. Min Gnt=8.Max Lat=56. > Non-prefetchable 32 bit memory at 0xe8200000 [0xe8200fff]. > I/O at 0x4000 [0x403f]. > > > ______________________________________________________________________ > > Linux version 2.4.18-18.8.0custom ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red >Hat Linux 8.0 3.2-7)) #1 Mon Dec 23 08:02:40 CST 2002 -- VB programmers ask why no one takes them seriously, it's somewhat akin to a McDonalds manager asking employees why they don't take their 'career' seriously.
signature.asc
Description: This is a digitally signed message part
