On Thu, 2003-01-02 at 16:47, Ian Thomas wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Thursday, January 2, 2003, at 07:39 PM, Cowles, Steve wrote: > > >> -----Original Message----- > >> From: Ian Thomas > >> Sent: Thursday, January 02, 2003 6:24 PM > >> Subject: Re: headless operation > >> > >> > >> -----BEGIN PGP SIGNED MESSAGE----- > >> Hash: SHA1 > >> > >> On Thursday, January 2, 2003, at 03:42 PM, Roger wrote: > >> > >>> What's it take to get a redhat 7.3 box to run without monitor > >>> connected? With X running, I can remove the monitor. Booting run > >>> level 3, it dies when the monitor is disconnected. > > > > That is weird. Removing the monitor should not cause your system to > > crash. > > As Ian stated, it might be hardware related. In fact, I configure all > > my > > headless boxes at runlevel 5, but I disable display :0 so that X will > > not > > start at the console (but still answers XDMCP requests from the > > network). > > I've been trying to get my OS X box to answer XDMCP requests generated > by my RH 8.0 box with no luck. Could you give me a list of the files > you changed > on the RH box so I can compare with what I've done. I still haven't > figured out > what side the problem lies on. I believe the directories which > contained the files > I needed to modify were /etc/X11/xdm and /etc/X11/gdm.
You might also try using ethereal to capture the XDMCP packets and inspect their contents. This way you can verify that the OS X box is replying (and that the RH box is sending). I had a problem connecting to a SCO Unix box and used ethereal to discover that SCO formats its XDMCP replies in an odd fashion. > > > > >> > >> It may be the hardware. I'm running RH 8.0 right now without a > >> monitor. Unfortunately, I can't convince this Gateway that I > >> don't need a keyboard on boot. It refuses to boot up without one, > >> giving everyone's favorite error > >> > >> keyboard error: press esc to continue > > > > Have you tried setting your BIOS to NOT issue the above error if the > > keyboard is missing? FWIW: I have 3 headless linux boxes that issued > > the > > same error until I found the proper setting in the motherboards BIOS. > > > > Worth a try! > > > > I'll look again, but I wasn't successful last time I checked. Thanks. > I also run several headless RH boxes (no keyboards or monitors) in runlevel 3. I suspect a problem with your BIOS. -- Cliff Wells, Software Engineer Logiplex Corporation (www.logiplex.net) (503) 978-6726 x308 (800) 735-0555 x308
signature.asc
Description: This is a digitally signed message part
