Does someone have the same experience with RH8.0? I put a static router statement in /etc/sysconfig/static-routes file as I did with RH7.0. But it doesn't seem to work when I reboot the PC. It takes the same static route when I put it manualy using "route" command when it's running. The route I wanted to put is ....
<routing table:before> Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 63.214.2.224 * 255.255.255.240 U 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 63.214.2.225 0.0.0.0 UG 0 0 0 eth0 <adding a route:manually> route add -net 10.0.254.248 gw 63.214.2.234 netmask 255.255.255.252 <after> Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.254.248 63.214.2.234 255.255.255.252 UG 0 0 0 eth0 63.214.2.224 * 255.255.255.240 U 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 63.214.2.225 0.0.0.0 UG 0 0 0 eth0 </etc/sysconfig/static-routes> eth0 net 10.0.254.248 netmask 255.255.255.252 gw 63.214.2.234 ....This didn't work when I rebooted. Toshi -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list