Hi folks, 

I've got a RH box connected to out telephone switchboard to play  a soundfile 
repeatedly creating the music for the music-on-hold.

When I put this box in, it was a fresh install of RH7.1, and everything worked 
fine.

However, since upgrading to 7.3+errata I have a problem.  When the box first 
boots up, the music plays fine and everything's great.  However, after a 
couple of hours, the music deteriorates and gets very distorted and crackly.

If I reboot the PC the music's great for another couple of hours.  This box is 
also used as a Postgresql server, network file server and print server and 
phone call logger, so rebooting the PC periodically is not really an option.

Anyone got ideas how I can fix this, or at least reset the sound sub-systems 
without having to reboot the whole box?

The modules.conf is listed below in case it's usefull. AFAIK I've got the 
latest kernel and module RPMs installed. I have tried re-running sndconfig 
but it only rewrites the same modules.conf file.

[root@donlin root]# more /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 8139too
alias usb-controller usb-uhci
alias sound-slot-0 via82cxxx_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 
2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 
|| :

-- 
Gary Stainburn
 
This email does not contain private or confidential material as it
may be snooped on by interested government parties for unknown
and undisclosed purposes - Regulation of Investigatory Powers Act, 2000     



-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to