That worked. Thanks!! ----- Original Message ----- From: "Rigler, S C (Steve)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, February 03, 2003 11:56 AM Subject: RE: Network
> If the commands I gave you below worked then your system should be using > iptables and not ipchains. > > Make sure ipchains is disabled (chkconfig ipchains off). > > Look at your iptables rules to make sure that iptables is running > > iptables -nL > > Use iptables-save to save your rules. They will be saved to: > /etc/sysconfig/iptables. > > Each time /etc/init.d/iptables is run (at boot) it will see those rules > and load them. > > -Steve > > > -----Original Message----- > From: John Salamone [mailto:[EMAIL PROTECTED]] > Sent: Monday, February 03, 2003 10:50 AM > To: [EMAIL PROTECTED] > Subject: Re: Network > > > Steve, > > When I used the "ipchains-save" command, it didn't save it permanently. How > do I do that? I tried stoppin / starting ipchains but it didn't do the > trick. Any ideas? > > ----- Original Message ----- > From: "Rigler, S C (Steve)" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, February 03, 2003 11:25 AM > Subject: RE: Network > > > > That was just an example. > > > > Substituting xx.xx.xx.xx with the IP address of the machine to which you > > wish to grant access would allow it to connect to port 22 on your firewall > > box. > > > > No reboots should be necessary on any machines to accomplish this. > > > > If you just need to grant general access to your win98 machine try this: > > > > iptables -I INPUT --src <win98 ip>/32 -j ACCEPT > > > > Seeing your Linux box in Network Neighborhood will require some additional > > configuration in Samba. > > > > -Steve > > > > -----Original Message----- > > From: John Salamone [mailto:[EMAIL PROTECTED]] > > Sent: Monday, February 03, 2003 10:14 AM > > To: [EMAIL PROTECTED] > > Subject: Re: Network > > > > > > Steve, > > > > iptables -I INPUT --src xx.xx.xx.xx/32 -p tcp -m tcp --dport 22 -j ACCEPT > > without saving it should I be able to see my Linux box in network > > neighborhood on my win98 machine? If so, I can't. Do I need to reboot > either > > of my machines to establish the connection? > > > > ----- Original Message ----- > > From: "Rigler, S C (Steve)" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, February 03, 2003 10:59 AM > > Subject: RE: Network > > > > > > > Depending on whether or not your firewall is using iptables or ipchains > > > there are commands you can use while the firewall is running to modify > > > the rules. This would also depend on what you are trying to accomplish. > > > > > > Example (using iptables): > > > > > > If I wanted to allow a certain IP address to access port 22 (ssh) on > > > my firewall box I would do: > > > > > > iptables -I INPUT --src xx.xx.xx.xx/32 -p tcp -m tcp --dport 22 -j > ACCEPT > > > > > > Forwarding rules would be a little bit more elaborate, but once you have > > > them set and they work, do "iptables-save" to save your rules. > > > > > > -Steve > > > > > > -----Original Message----- > > > From: John Salamone [mailto:[EMAIL PROTECTED]] > > > Sent: Monday, February 03, 2003 9:54 AM > > > To: [EMAIL PROTECTED] > > > Subject: Network > > > > > > > > > Hi, > > > > > > I was wondering if there is a way to punch a hole in the Linux firewall > to > > > allow certain IP addresses through it without stopping it or changing it > > so > > > all IP addresses are allowed through it. My network is set up as so: dsl > > > connected to my router / firewall connected to a win98 machine and a > Linux > > / > > > win2000 server dual boot machine? Thanks > > > > > > > > > > > > -- > > > redhat-list mailing list > > > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > https://listman.redhat.com/mailman/listinfo/redhat-list > > > > > > > > > > > > -- > > > redhat-list mailing list > > > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > https://listman.redhat.com/mailman/listinfo/redhat-list > > > > > > > > -- > > redhat-list mailing list > > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > > https://listman.redhat.com/mailman/listinfo/redhat-list > > > > > > > > -- > > redhat-list mailing list > > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > > https://listman.redhat.com/mailman/listinfo/redhat-list > > > > > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/redhat-list > > > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
