|
echo
"1" >/proc/sys/net/ipv4/ip_forward HTH Rick -----Original
Message----- Hi All, I've
got a single RH 8.0 box I'm setting up as a firewall, 2 nics in two separate IP
domains. IPTables is not running
yet as I want to get routing straight before I start iptables. Using route -add I have added net work
"A" go out eth0 and network "b" go out eth1 and all is fine
when pinging from the box itself - I can ping both sides - any host from
network "A" or "B" can be reached from the box. I drop
back to a host on a hub behind network "A" and I can ping both
interfaces on the firewall - netstat -rn on the host confirms proper
routing. Same from a host inside
network "B" - I just cannot ping across. Since the route -show on the future firewall box has the
proper routes how do I get them to route across? Do I
need to run gated like I'm used to doing on the HPUX boxes - I thought simple 2
ip domain with static routes should do the trick? No dynamic routing protocols going on, just 2 simple
subnets. Thanks
for any help Mike Pacheco |
- RH 8.0 - 2 NICS and routing between 2 subnets Pacheco, Michael F.
