Try PowerBoot

from Blueskyinnovations. I did and it works fine.

If I remember correctly from the blurb it handles BeOS and much more.
Check their site for this though. They do rattle off a long list
of O/S's though.

You will probably need to boot from a DOS disk to install it though!!!

It works fine for me NT and Linux.

I think they are at www.blueskyinnovations.com 

Regards,

Mark Reardon





matt wrote:
> 
> GBNSCHBACH wrote:
> >
> >
> >    If you have a DOS partition,   get system commander.  Then you can
> > boot 2 or 3 or 4 OS's.   Oh yeah,  and if it does not work, you can always
> > restore the original partition table......
> >
> >  Good Luck,
> >  Greg
> >
> > --
> >   PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> > http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> >          To unsubscribe: mail [EMAIL PROTECTED] with
> >                        "unsubscribe" as the Subject.
> 
> greg,
> 
> thanks for the response.
> 
> (un)fortunately i am not running windows or dos.
> 
> my system currently looks like this :
> 
> ibm x686 p166+
> supermicros p5ste motherboard (430hx chipset)
> 6.4 gig maxtor (ide) hard drive
> 3.5" floppy drive
> 24x speed ide panasonic cd rom
> matrox millenium (pci) 4 meg
> 21"iiyama monitor
> 128 meg edo ram
> awe 32 plug_n_pray sound card (isa)
> 33.6k us robotics sportster voice internal modem (isa)
> 
> keyboard and two button (9 pin d-type) micro$oft compatible mouse
> 
> red hat linux 5.0
> 
> ttfn.
> 
> matt.
> 
> --
>   PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
>          To unsubscribe: mail [EMAIL PROTECTED] with
>                        "unsubscribe" as the Subject.


-- 
  PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
         To unsubscribe: mail [EMAIL PROTECTED] with 
                       "unsubscribe" as the Subject.

Reply via email to