Hi,
This looks like your drive does not support DMA access.
Check if it is enable with the following (as root)
hdparm /dev/hda
it should report an output looking like this:
/dev/hda:
multcount = 16 (on)
IO_support = 3 (32-bit w/sync)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 9726/255/63, sectors = 156250000, start = 0
If DMA is on, try this
hdparm -d 0 /dev/hda
On Fri, 2003-06-13 at 13:00, Chris W. Parker wrote:
> Anyone have any ideas?
>
> I seem to be getting this more and more frequently.
>
> I found one solution that suggested to use 'hdparm -d1 /dev/hda'.
>
> 1. Who else has had this problem and what did you do to solve it?
> 2. Why does it happen in the first place?
> 3. Do I need to execute the command above each time I boot up, or does it only need
> to be executed once?
>
> Here is the error:
>
> > hda: timeout waiting for DMA
> > ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> > hda: status error: status=0x58 { DriveReady SeekComplete DateRequest }
> > hda: drive not ready for command
>
>
> Thanks,
> Chris.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:[EMAIL PROTECTED]
> https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
