(Sorry receiving emails currently so can't reply, but will change that now.)

[root@<hidden>]# uname -a
Linux <hidden> 2.4.18-18.7.xbigmem #1 SMP Wed Nov 13 18:24:15 EST 2002 i686 unknown 
[root@<hidden>]# rpm -q ntp ntp-4.1.1-1

[root@<hidden>]# cat /etc/ntp.conf|grep "^#"
restrict default
restrict 127.0.0.1
server stratum_IP
restrict stratum_IP mask 255.255.255.255 nomodify notrap noquery
driftfile /etc/ntp/drift
broadcastdelay  0.008
authenticate yes
keys            /etc/ntp/keys

I have a system where these commands work:
ntptrace stratum_IP
ntpq -p statum_IP

but, when I startup the NTP service I see *no traffic* during a tcpdump, and if I run 
ntpdate, all I see is the following, but again not traffic in
tcpdump:
[root@<hidden>]# ntpdate stratum_IP
20 Jun 12:07:50 ntpdate[27239]: poll(): nfound = 0, error: Success 20 Jun 12:08:50 
ntpdate[27239]: poll(): nfound = 0, error: Success

Any ideas on how I can proceed?  I've tried copying the install and every RPM package 
on another machine, and except for differences with the SCSI hardware RAID setup, the 
systems are very close to being the same.  This non-hardware RAID system is able to 
run the ntpdate command though...

I've also tried 3 different NTP RPMS, and even v3 (xntpd3), and 3 different kernels 
with no luck on these systems.  I've tried various /etc/ntp.conf configurations, and 
have worked off and on on this trouble for weeks...

Marco


-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list

Reply via email to