On Mon, 2003-06-30 at 15:38, Bill Tangren wrote: > I sometimes have problems with my scsi tapes. Today, with I try to do a > retension on a tape, I get this error: > > # mt -f /dev/st0 retension > /dev/st0: Input/output error > # > > To say that this error message is not helpful is an understatement. I > tried cleaning the drive: no luck. The drive is a: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: Seagate Model: STT20000A Rev: 8.43 > Type: Sequential-Access ANSI SCSI revision: 02 > > This is taken from the /proc/scsi/scsi file. > > Any suggestions on how I can debug the problem? > > Bill Tangren > Sometimes a tape drive will go offline after having an error. Try turning the tape drive off and back on. On some older Seagate 4mm, I used to have to shutdown the system and do a cold boot to get the drive back on line. It was a real nuisance.
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
