Hello:
I hate to ask this on this particular list (since I'm having problems
under Slackware), but seeing the number of people who have been burning
their own Red Hat CD's, something I am trying to accomplish myself, I
thought I'd ask this question here and hope somebody has gone through a
similar problem.
I'm trying to get a Yamaha CDR400 compatible burner (actually it is a
Dynatek but the guts are equivalent to the Yamaha) working under Linux
2.0.34 (Slackware 3.4) using a BusLogic Flashpoint SCSI card (a card which
has worked fine for tape backups on /dev/sd0).
The drive is detected at system bootup by the BusLogic bios bootstrap
sequence, and set to device #6. I've compiled in SCSI support for Linux
as follows:
# Module support enabled...
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
# SCSI support
CONFIG_SCSI=m
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=m
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# SCSI low-level drivers
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
I've made sure to load the appropriate modules:
# SCSI controller support:
#/sbin/modprobe 53c7,8xx
#/sbin/modprobe NCR53c406a
#/sbin/modprobe aha152x
#/sbin/modprobe aha1542
#/sbin/modprobe aha1740
#/sbin/modprobe aic7xxx
#/sbin/modprobe eata
#/sbin/modprobe eata_dma
#/sbin/modprobe eata_pio
#/sbin/modprobe fdomain
#/sbin/modprobe in2000
#/sbin/modprobe qlogic
/sbin/modprobe scsi_mod
/sbin/modprobe scsi_syms
#/sbin/modprobe sd_mod
#/sbin/modprobe seagate
/sbin/modprobe sg
#/sbin/modprobe sr_mod
/sbin/modprobe st
#/sbin/modprobe u14-34f
#/sbin/modprobe ultrastor
#/sbin/modprobe wd7000
Yet, when I attempt to burn my image using "cdrecord", I get an error. To
wit:
cdrecord -V -dummy speed=0 blank=all dev=6,0 RH51.iso
(I also tried dev=0,6)
scsidev: '6,0'
scsibus: 0 target: 6 lun: 0
Executing 'test unit ready' command on Bus 0 Target 6, Lun 0 timeout
40s
CDB: 00 00 00 00 00 00
cdrecord: Success. test unit ready: scsi sendcmd: fatal error
...
cdrecord: Cannot do inquiry for CD-Recorder.
I did a "cdrecord -scanbus" and get:
cdrecord: No target found.
Any ideas? ;-(
--------------< LINUX: The choice of a GNU generation. >--------------
Steve Frampton <[EMAIL PROTECTED]> http://qlink.queensu.ca/~3srf
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.