Cannot dial out as in physical lack of dialtone, or cannot
establish routes, or what? I have a similar setup which works fine, as
long as the ppp gateway does NOT have a default route using the ethernet
card. Must be the modem. If I make the ethernet card default, I can still
dial of course, but not get anywhere...
-----------------------------------------------------------
Matt Housh email: [EMAIL PROTECTED]
MicroComputer Specialist University of Tulsa
"Pardon me, stewardess. I speak Jive."
On Wed, 22 Apr 1998, Chuck Carson wrote:
> I have a slight problem. I have a small lan that contains a mix of NT and RH
> machines. One of my redhat
> machines I use to dial up to the internet from time to time. Here is the
> problem: If the network device
> (eth0) is active, I cannot dial out using the modem. If I temporarily
> disable eth0, I can dial up without
> and problems. I just can't get both to work simultaneously. I have had it
> working like this before on this
> very machine, but I have reinstalled completely since then and I do not know
> what I did before.
>
> Can anyone point me in the right direction?
>
> Thanks in advance,
> CC
>
>
>
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.