Do you know what version the BIOS is? What Smart Start version did you build with? There is an issue regarding SS6.2 or 6.3 I'm not sure that I know causes system boots under Windows. I would start by updating the BIOS for sure. Are you using hardware RAID?
<<JAV>> ---------- Original Message ----------- From: "Maurer, Justin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tue, 30 Sep 2003 16:00:56 -0400 Subject: ProLiant DL380 Frequent Lock-ups - SCSI driver? > Greetings, > > > > We have a Compaq/HP ProLiant DL380 G3 (GigE) experiencing > frequent lockups. The machine is a build server running RHL 8.0 > (Psyche) with the default 2.4.18-14smp kernel (the machine is a dual > Xeon), and has almost constant disk activity. The machine locks up > consistently, though not on a particular interval...Usually it will > go for 16-24 hours without a reboot, but sometimes it can be 20 > minutes, sometimes it can be for days at a time. I can't point to > anything more than the constant disk activity that makes me say this, > but could it be an issue with the SCSI driver? Here is what dmesg > has to say on the subject: > > > > > > SCSI subsystem driver Revision: 1.00 > > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > > Compaq CISS Driver (v 2.4.30) > > cciss: Device 0xb178 has been found at bus 1 dev 3 func 0 > > cciss: using DAC cycles > > blocks= 71122560 block_size= 512 > > heads= 255, sectors= 32, cylinders= 8716 > > > > blk: queue c042e400, I/O limit 4294967295Mb (mask 0xffffffffffffffff) > > Partition check: > > cciss/c0d0: p1 p2 p3 p4 < p5 p6 > > > Journalled Block Device driver loaded > > > > The machine also has two integrated BroadCom BCM5703X GigE chips > (only one is beng used). > > > > Can anyone suggest troubleshooting techniques? Are any of these drivers > known to be problematic? > > > > Thanks, > > Justin ------- End of Original Message ------- -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list