I remember when I was looking at getting an aha1502 working (never happened
& no I'm not confusing these two cards) that there are some args that must
be past to the kernel for it to notice the aha1520.
There is a doc in the kernel source tree that discribes it, aswell as the
lilo-howto.
Dan
At 10:39 PM 4/28/1998 -0500, Son of a Preacherman wrote:
>
>I have a mailserver that has SCSI hard drives, and I have recently
>installed a SCSI tape drive. However, the tape drive has to be on a
>different SCSI card. I can't get the kernel to recognize both cards.
>The Hard drives are on an Adaptec AIC-7880U, and there are two 4.5 G, one
>9 G, and one 2 G. Then we added an Adaptec AHA-1520 with an SDT-9000 Sony
>DDS tape drive. I could not access the tape drive by accessing /dev/st0.
>I have already tried building in support for both SCSI controlers and that
>didn't help. Any help would be appreciated.
>
> Lee Parker
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.