>I have a 6.4GB Maxtor hard drive that I want to move my current system to.
>My current system has a 1.6GB drive devoted to WIN95 and a 1.7GB drive
>devoted to REdhat 5.0. I have tried setting the system up with a 100M
>/boot partition (I know it's large, but I wanted to make sure redhat
>doesn't outgrow it in the near future), a 1GB WIN95 partition, and then
>several linux partitions. I can't get lilo to write to the MBR of
>the disk. Is it true that Windows has to be in the first part of the
>disk too, or can I put all my Linux stuff first and then tack WIN95 on
>the last 1GB of the disk? Can someone who has a disk near this size
>which contains both their linux and Micro$haft partitions on it please
>send me the output of df. Thanks very much.
>-Vicki
You have to keep in mind how a PeeCee BIOS boots the system. It wants to
boot from the FIRST hard disk, which will be hda on the EIDE bus. It is the
ONLY disk that will have the MBR. Therefore, lilo need only write to that
disk.
I know, this makes it real tough to make a MBR on a disk that isn't the first
one, but will be once the disks are rearranged.
How do you get around it? Well, you make sure that you have a boot floppy.
Set up the /etc/fstab on the new disk so that it will mount stuff correctly
when it is in the new location. Move the new disk to the hda position and
boot from the floppy, telling that to boot using the hda root. Once you've
booted, then run lilo to make the MBR for booting Linux and Windoze95.
The other way to do this is to install the new disk as hda and move the
other two disks to other locations, probably hdc and hdd (with hdb being
your CD-ROM drive). Then load Windoze95 on the hda2 partition (with hda1
being your /boot for Linux). Using another utility, move the stuff from
the old Windoze disk to the new one. If you have a Zip drive, there are
utilities with it that will move programs for you.
Then do a minimal load of Linux. The reason to do Linux last is because
Windoze95 loading with rewrite the MBR. Once Linux is loaded, then you can
copy over your Linux stuff from the old drive to the new one. After doing
that, fix your /etc/fstab and /etc/lilo.conf and rerun lilo. Fix any other
config files that may contain references to changed drives. Then reboot.
Those are my suggestions, your mileage may vary.
MB
--
System Administrator - Finnigan FT/MS - Madison WI. URL:http://www.ftms.com/
e-mail: [EMAIL PROTECTED]
phone: (608) 273-8262 ext: 612 fax: (608) 273-8719
Visit - URL:http://www.vidiot.com/ (Your link to Star Trek and UPN)
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.