Hi
Are you sure you pluged it in to the right connector I once
spent a half an hour messing only to discover it was plugged
in to the wrong side.
Linda
-----Original Message-----
From: Mark A. Zottola <[EMAIL PROTECTED]>
To: RH <[EMAIL PROTECTED]>
Date: Saturday, November 06, 1999 7:07 PM
Subject: Unable to get dial tone w/ modem
>I have a US Robotics 56K internal modem on an AMD K6-3 box. When trying
>to configure ppp I run into the following problem. When i try to connect
>to my ISP my modem reports no dial tone.
>
>I notice that if I have my phone off the hook - such that I can hear the
>dial tone in the receiver and plug in a phone line into the computer -
>the dial tone in my telephone disappears. I have rebooted and this does
>not fix the problem.
>
>I do not have the docs for my modem, but as I specified I did NOT want a
>winmodem, I am fairly sure this is not a winmodem. I do not have the
>exact model as where my work connection is (here) and where my computer
>is (home) are a ways away. I believe my modem is a USR 56k V.90. Any
>help you can pass my way would be greatly appreciated!
>
>Thanks!
>--
>Mark A. Zottola Alabama Research and Education Network
>119 Rust Research Center Nichols Research Corporation
>1801 University Boulevard VOICE: (205) 934 - 3893
>Birmingham AL 35294 E-MAIL: [EMAIL PROTECTED]
>
>
>--
>To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
>as the Subject.
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
