At 12:01 PM 11/08/1999 +0800, you wrote:
>I think I've done all necessary stuff as described in the installation etc,
>but my Linux server (named MARS) is not showing up in network neighbourhood.
>My 'real' Novell 3.12 server is showing up fine. Is mars supposed to show up
>or is this one of the 'bugs' in the Netware Client?
>
>One thing I haven't done is re-compile the kernel with the options for mars
>as described in the in the installation. Is this necessary on a stock RedHat
>5.2? It's about the only thing I'm still scared of doing, as this is now an
>active server and I don't want to piss any users off by not being able to
>boot up if I mess up the compile (I've never done it before and there's
>plenty of messages here on this list from people who have troubles).
>
>P.S. On start-up, the IPX Swansea thingamajig IS showing up. Does that mean
>IPX is supported?

I haven't tried Mars-nwe yet so I don't know a whole lot about it, but I
and pretty handy with netware which it emulates.  Somethings you might want
to check out are your frame-type and network number.  Most of the
situations I've seen with netware servers not showing up have revolved
around the incorrect frame-type.  In a situation where your netware 3.12
server and your client workstation are both using 802.3 and your MARS
server is bound to ethernet_ii, you'd be able to see the 3.12 server just
fine but the MARS server wouldn't show up on your IPX network at all.  Just
a shot in the dark.  Good luck.


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to