Hi everybody,

I'm upgrading a server from NT4 to RedHat6.1 ;^) and am having some difficulty getting 
the DAT to work the way I want. Specifically, Arkeia can use /dev/st0 just fine and 
"mt ... status" gets a good answer, but KDat says there's no tape in the drive. (I've 
tried /dev/sg1, /dev/sgb, and /dev/nst0 in preferences).

dmesg:
<snip>
st: bufsize 32768, wrt 30720, max buffers 4, s/g segs 16.
Detected scsi tape st0 at scsi0, channel 0, id 3, lun 0
</snip>

mt -f /dev/st0 status:
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x13 (DDS (61000 bpi)).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN

I don't want to buy Arkeia when KDat is perfect for this job.

Any ideas?

TIA,

Larry


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to