You haven't supplied enough information.
1) Is sound compiled as a module?
If so, are the modules loading (in the right order)? Check with
'lsmod'
2) Are there resource conflicts? (IRQ/DMA/Ports)
Check with 'cat /proc/interrupts' etc.
3) Verify that you really have a Crystal PNP chipset.
4) Check /var/log/messages for clues.
5) Read the Sound-HOWTO and the Sound-Playing-HOWTO in /usr/doc (usually)
-- Scott
____________________________________________
Scott Reimert
Siemens Business Services (SBS)
4900 Old Ironsides Drive, M/S 408
Santa Clara, Ca. 95052-8075
*: 408.492.3874
*: [EMAIL PROTECTED]
* Black holes are where God divided by zero *
-----Original Message-----
From: Daniel Goldin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 16, 1999 10:35 AM
To: [EMAIL PROTECTED]
Cc: recipient list not shown
Subject: sound config in 6.1
No sound after install. I have, I believe, a Crystal PNP Audio
System (CODEC), MPU-401 compatible.
CS4232 Audio Device Driver
Not only do I not have sound, but the system freezes frequently on
reboot at this point.
SCSI: 0 hosts
SCSI: detected total
I'm a non-programmer, non-system-administrator trying cobble together
a humble Linux box. Thanks for any help.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.