Along these lines, I'm having trouble with a USR 56K Voice INT PnP which (under windows) is installed on com2 but, when i use linux, it finds the modem on /dev/ttyS0. However when i try to connect using kppp, it hangs at intializing modem. I've tried setting every possible option, changed the intialization commands etc. I took a look at the logs and i noticed a kernel message to the effect that ppp0 hadn't been configured. I tried to configure it manually with no luck, and tried using pppd to dial via command line with no luck. I started peeking at the isapnp.conf file to see if i could move the modem to Com2 but was scared away when i couldn't understand a word it said. Any help? TIA jeff -----Original Message----- From: Joel West [SMTP:[EMAIL PROTECTED]] Sent: Friday, December 17, 1999 4:49 PM To: [EMAIL PROTECTED] Subject: Re: someone is trying /dev/ttyS3 On Fri, 17 Dec 1999 [EMAIL PROTECTED] wrote: > Could you help me get my modem setup properly cant figure out whether to use > /dev/ttyS0 or > **********1 > **********2 > > in windows it is set for com port 4 > dont know if that helps much but please give me some help and i can contact a > friend to track down the abuser > > Thanks ! > > > -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject. -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
