On Thu, 23 Dec 1999, Philippe Moutarlier wrote:

> Yes : edit your /etc/X11/XF86Config manually. The only thing the configure thing 
>does is creating this file and setting up link to the right X server. All this can 
>done manually.
> 
> If you go at the end of the file, you will see screen sections. For each device, you 
>will  
> 
> # I128, and S3V)
> Section "Screen"
>     Driver      "accel"
>     Device      "ATI|3D Rage LT Pro AGP-133"
>     Monitor     "My Monitor"
>     Subsection "Display"
>         Depth       16
>         Modes       "1024x768"
>         ViewPort    0 0
>     EndSubsection
> EndSection
> 
> now, just change the Modes line to read :
> "800x600" "1024x768"

I am working under the assumption that the first Screen section is the one
that is used; for me (and you) the accelerated server.

However, I changed it as specified, but when I start up, it doesn't work,
and when I log back out, I see the following error was written to the
screen:

(--) SVGA: i740: Removing interlaced mode 1024x768
(--) SVGA: i740: Removing interlaced mode 1152x864
(--) SVGA: i740: Removing interlaced mode 1280x1024
(**) SVGA: Mode 1024x768: mode clock =  85.000
(--) SVGA: There is no mode definition named 1280x1024
(--) SVGA: Removing mode 1280x1024 from list of valid modes.
(--) SVGA: Virtual resolution set to 1024x768

I know that my moniter can support 1280x1024, as well as my video
card; Hell! I had it running before, but how do I get it to run it again?

merryxmas,
/me

-----------------------------------------------------------------------
Mike Erickson     <[EMAIL PROTECTED]>    http://www.fix.net/~merickson/
"The world is my country and my religion is to do good." - Thomas Paine


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to