|
Hello,
I'm having trouble getting my Accton ethernet card to work on my machine. (HP Pavillion 8575C) The card is a Accton en1207d-TX-18F. This is on a dual boot machine and the card works
fine with Windows 98.
So that rules out wiring or a hardware
failure. I'm using redhat 6.1 which
I downloaded as a disk image and installed from a
CD.
I got the rtl8139 driver from http://cdsdis.gsfc.nasa.gov/linux/. Here are some of the error messages that I got: ** This is the message from the
rtl8139
diagnostic program: ----------------------------------------------------------------------------------------------------------- rtl8139-diag.c:v1.01 4/30/99 Donald Becker ([EMAIL PROTECTED]) Index #1: Found a SMC1211TX EZCard 10/100 (RealTek RTL8139) adapter at 0x1400. This chip has not been assigned a valid IRQ, and will not function. This must be fixed in the PCI BIOS setup. The device driver has no way of changing the PCI IRQ settings. Use '-a' or '-aa' to show device registers, '-e' to show EEPROM contents, or '-m' or '-mm' to show MII management registers. --------------------------------------------------------------------------------------------------- These are the Compile errors: It did compile however. ------------------------------------------------------- rtl8139.c: In function `rtl8129_start_xmit': rtl8139.c:1014: warning: type defaults to `int' in declaration of `type name' ------------------------------------------------------- ________________________________________
[root@bambam linux]# lsmod Module Size Used by rtl8139 11644 0 (unused) _________________________________________ [root@bambam linux]# /sbin/ifconfig eth0
192.168.0.3 broadcast 192.168.0.255 netmask
255.255.255.0 SIOCSIFFLAGS: Resource temporarily unavailable Would anyone have any advice you could offer on how to get this machine connected to the network? Thanks, Guy |
