I'm trying to help a friend out who's attempting to install RH6.1 on his
box. It's an Intel P90/32M machine with a 1Meg IDE drive and an Adaptec
AHA151 SCSI adapter for the CD-ROM. His first issue was RH not detecting
the
SCSI card, but after having the same trouble with a similar box, I was
able
to provide him the "AHA152x=0x340,11,7,1" kernel parameter that got me up
and running. However, his mileage varied, as seen below. Can anyone help?

--------------- His message --------------

I got past the undetected SCSI driver problem this evening. I think. But
then I had other problems. Or maybe it is still the same problem.

I wrote down four parameters in your office, but it seems there are five
"0x340,11,7,1," the last one is for parity, and without it, the driver
won't load, since the syntax is wrong. I just left it blank so it would
select the default. I also tried 1 and 0 as values. All three
(default,1,0)
produced the same result.

The CD drive spins up (good sign) and it appears to load software from the
drive. Then the GUI install screen says "probing for mouse" and then the
screen goes blank and gets a bunch of lines flashing across it like poorly
tuned broadcast reception.

I thought that the installer was probing the video card, and that it would
sort itself out after a while, but after 30 minutes, it was still out of
commission. Trying to switch to a different (text based) console did no
good either.

I reran this several times, and copied the following off of the
installation log screen:

This part was in the log before the system prompted me for the SCSI
driver:

*probing buses
*finished bus probing
*found nothing
*65 key maps available
*loaded 9 key map tables

After I provided the SCSI driver information, the following

*going to insmod aha152x.o
*trying to mount dev scd0
*probing buses
*found suggestion of Card:S3 Trio 65 (generic)
*found nothing
*going to insmod raid0.o
*going to insmod raid1.o
*going to insmod raid5.o

At this point the machine paused for about 20 seconds and then the screen
fizzled out.

Do you know what is happening here? The CD spins up and the access light
goes on. Does Linux have access to the CD, does it know it has access to
the CD? The raid drivers are SCSI drivers, so the log seems to suggest
that
Linux is hunting around trying to access the CD player, but is unable to
do
so.

Very frustrating.


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to