I have a vanilla installation of RH 6.1 on my Toshiba Portege 3025CT
notebook. The machine comes with a 3Com pcmcia modem. A friend of mine has
a similar model: the 3015CT. On his machine, minicom initializes the modem
when the program is invoked; on mine it won't.

  I've tried my modem in either pcmcia slot without any difference. I put my
friend's modem in my machine without any difference. I've compared the files
config, config.opt and serial in /etc/pcmcia. I've compared the init strings
in minicom, and both machines have /dev/modem as a symbolic link to
/dev/ttyS1. Yet, on my machine, mimicom opens, but does not echo either the
init string, or any other chars typed on the keyboard. In addition, minicom
indicates that it is always on line -- even when there's no phone connection
to the modem itself.

  We're stumped. I want to get this working and haven't a clue where else to
look. A couple of other oddities which may, or may not, be relevant: even
when the pcmcia NIC is connected to the LAN when the notebook is powered on,
eth0 initialization is delayed. Once the system boots, I open the slot and
slide the NIC out. After I hear the system beep, I slide the NIC back in
fully and the system beeps twice and brings up eth0. Very strange. My
friend's machine connects during the boot process.

  The other oddity is the behavior of ssh. I installed openssl/openssh on my
LAN server and the notebook and tested it across the network. I can
establish a connection from the workstation to the notebook, but not the
other way; I see the message that the resource is temporarily unavailable.

  Could I have a corrupted installation on the notebook? I would appreciate
ideas on what might be the problem and how to go about identifying the
cause. FWIW, the other strange thing that happened after I upgraded the
notebook from RH 5.2 to RH 6.1 is that apmd now warns me about low battery
levels starting at 51% of full charge, instead of only a couple of minutes
left!

  It would certainly be nice to get everything working flawlessly again.
Especiailly if I don't need to do a complete reinstallation from scratch.
Any and all help gratefully accepted.

TIA,

Rich

Dr. Richard B. Shepard, President

                       Applied Ecosystem Services, Inc. (TM)
              Making environmentally-responsible mining happen. (SM)         
                       --------------------------------
            2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A.
 + 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED]


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to