Charles Galpin wrote:
> 
> I don't think this is true. I have used a stock RH6.1 kernel with two
> idnetical cards using a module.
> 


OK here ya go..


In your /etc/lilo.conf file add the following line:


append="ether,0x000,00,eth0 ether,0x000,00,eth1"

Replace 0x000 with the io port for the card and 00 with the irq. eth0 is
the card closest to the power supply, eth1 is the next, eth2 the next
ect ect. THe kernel recognizes things from Slot0 to SlotX when it
queries the bus for cards.


P.S make sure to rerun /sbin/lilo before rebooting.

-- 

David D.W. Downey   Red Hat Certified Engineer  Cert# 806100581800665 
Assistant Site Manager  http://www.LinuxNewbie.Com  Come on, join us!
Resume is online - http://www.brainbench.com/transcript.jsp?pid=96113


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to