Dan Horth <[EMAIL PROTECTED]> wrote:

> Just wondering if anyone has a Seagate Scorpion 12/24 DDS-3 DAT drive 
> working properly on their redhat based system. I cannot for the life 
> of me get hardware compression to work with the (*@#@#% drive no 
> matter what I try :(

You shouldn't have to do anything to enable compression - it is normally
on by default.  Now, if you are trying to backup highly uncompressible
data, you are not going to fit 24GB onto one of those tapes.  I've found
for an average mix of files though, 24GB is a good approximation of the
tape capacity.

I've got two servers - one running Redhat 5.2, and another running
Redhat 6.0. Both have Seagate Scorpion 12/24GB DDS-3 DAT drives.  I've
run my own home-grown shell-script backup system that is a wrapper
around mt, find and tar.  I use mt just to rewind the tape, and seek to
the end of the data if running in "APPEND" mode with my backup script. 
Anyway, on a weekly basis, my full backup on both of these systems is
approximately 18GB - a mix of binary and source, plus lots of user
data.  I append daily incremental backups to the same tape, with the
backup script set to eject it on the last day of the week.

So I am fitting 18GB, plus probably a hundreds of MB's of incrementals,
onto one tape.

FYI, here is the output of "mt status" for the drive on the Redhat 6.0
(kernel 2.2.14) system:

[/root]# mt -f /dev/nst0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 512 bytes. Density code 0x25 (DDS-3).
Soft error count since last status=0
General status bits on (41010000):
 BOT ONLINE IM_REP_EN

And here's the contents of /proc/scsi/scsi, for just that drive (cat
/proc/scsi/scsi to see this):

Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: ARCHIVE  Model: Python 04106-XXX Rev: 735B
  Type:   Sequential-Access                ANSI SCSI revision: 02

Note that the default switch settings on the Seagate Scorpion 24 will
have it identify itself as an Archive Python drive.  I never saw a
reason to open the drive up and change that.  I guess Seagate acquired
Archive's technology a few years back - the 2GB DDS-1 drive that I
replaced was actually made by Archive...

Hope this info helps you figure out your problem...
 --
/------------------------------------------------\
| Jim Morris  | Business:  [EMAIL PROTECTED] |
|             | Personal:  [EMAIL PROTECTED]        |
|------------------------------------------------|
|       AOL Instant Messenger:  JFM2001          |
\------------------------------------------------/


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to