On 25-Apr-00 Tony Pearson opined:
> Friends:
> I am running Red Hat 6.1 on an Aptiva 572 system.
>
> I installed a RealTek RTL8029(AS) ethernet PCI network NIC card into my
> Aptiva,
> but can't seem to get it to be recognized as "eth0" device. No ethernet
> messages show up during startup.
>
> I went to the RealTek website and they indicated that the ne2k-pci.o
> driver
> should work for this model. I found that I already have ne2k-pci.o in my
> /lib/modules/2.2.12-20/net directory.
>
> When I do an 'insmod ne2k-pci.o' I get the following messages:
> ne2k-pci.o: unresolved symbol ei_open
> ne2k-pci.o: unresolved symbol ethdev_init
> ne2k-pci.o: unresolved symbol ei_interrupt
> ne2k-pci.o: unresolved symbol NS8390_init
> ne2k-pci.o: unresolved symbol ei_close
Try using the ne.o module and see if that helps.
I know, it's not supposed to work that way. But I have a LinkSys that is
PCI. I have to use the ISA module and pass the IRQ in conf.modules. I
managed to get it to work with ne2k a couple of times. But it's been
hit-and-miss, not some special configuration.
---
Here we are in America. When do we draw unemployment?
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
