At 03:54 PM 4/25/00 -0500, you wrote:
>I am setting up a test lab to be able to test the ppp setup that we are
>gong to be using to communicate to remote sites. I am behind a
>panasonic phone system and have the two modems that are going to be
>communicating on different extensions. I can dial out and get the other
>to ring but the intercom call (dial ext number only) results in a dual
>ring that the modem is interpreting as busy. Both of these modem behave
>the same way. No big supriize since they are both US Robotics modems
>but of different vintages. I do not even know what they are just that
>they are US robotics at least 28.8s.
>
>Is there anyway to tell the modem to wait a bit before giving up on the
>busy? I would even be happy to be able to tell it don't worry about the
>busy at this point.
>
>Any help appreciated,
>
>I skimmed the modem howto and could find no reference to this sort of
>issue.
>
>BTW a linksys combo card in my laptop has no problem dialing into the
>remote computer via the intercom feature of the phone system.
>
>Bret
>
Look at the At commands for the modem. There may be a way to change the
busy detection with one of the S registers. You may also be able to do
something with the X commands, but it has ben too long sense I had to
play with this, so I don't remember...
Mikkel
--
Do not meddle in the affairs of dragons,
for you are crunchy and taste good with ketchup.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
