> points during the installation. I decided to go ahead and
> wipe the disks
> clean for now (since I get get install to finish...now of
> course...Dos FDisk
> won't remove the partitions and I can't get Fdisk from the
> installation
> (expert mode, custom) to load...it errors out...I can run
> disk druid, make
> my changes and then click the "back " button and it asks if I
> want to save
> changes and I choose yes. I continue clicking back though
Try doing a warm boot after this "yes". Other option would be to use a
rescue disk on rescue mode and try running fdisk (Linux) that way. Other
thing I would try is to check the BIOS for a HDD FORMAT option, and see if I
can do something from there. Check for your hdd manual for a hardware clean
method (re setting a jumper and boot or something similar). What about
mounting the disk on another box that has Linux up and running and try a
repartition from there? Try also an fsck on your drives. Maybe it can fix
some problems on them. There is actually a checking option that does
read/write tests that will destroy all information on the hdd. A nice way to
clean the drive.
Hope any of this helps.
-Manuel.
> the menus and
> until I get the country or language (I can't remember which)
> and the only
> option is ok (there is no back button) so to get out I
> ctrl-alt-del and when
> I roboot the old partitions are still there. Partition Magic
> 3.0 gets the
> partition table error #116 and I can't do anything with it.
> Any help????
> Please be kind I am linux dumb!
>
> Jeremy Bradley
> Network Administrator Voice
> : (765) 668-8144
> Hartson-Kennedy Cabinet Top Co., Inc. Fax : (765) 662-3452
> 522 W. 22nd Street Email :
> [EMAIL PROTECTED]
> Marion, IN 46953
> Internet : www.hartsonkennedy.com
>
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
>
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.