I've got Veritas Netbackup running with no Microsoft in sight... the main
server is an SGI Origin 2000 running IRIX 6.5.7m, with clients being a
conglomeration of Linux (5.2, though that will change soon to either 6.1 or
6.2) and various flavors of IRIX from 6.5 to 6.5.4m.

The version we have allows Linux, HPUX, Solaris, IRIX, or NT to be the
server, as well, though our STK9710 is hooked up to the Origin, making it an
easy choice for the backup (plus who wants to back up a TB or RAID5 over
100BT?)  :P

Bill Ward 

-----Original Message-----
From: Jason Costomiris [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 03, 2000 9:33 AM
To: [EMAIL PROTECTED]
Cc: recipient.list.not.shown; @nswcphdn.navy.mil
Subject: Re: 100GB native Tape Drives


On Wed, May 03, 2000 at 12:34:51AM -0700, Adam Sleight wrote:
: Anyone know the inside scoop as to WHEN HP, IBM, etc. will
: introduce 100GB/200GB tapes drives.  How much longer must we all
: wait?  Why get a 40GB DLT Autoloader if these puppies are going
: to be out?  

Nobody seems to know when that stuff will be introduced.  We couldn't wait,
so we went ahead and bought an AIT-2 silo.  We got one of these:

http://www.spectralogic.com/treefrog/treefrog.htm

We did the 15 tape config w/2 AIT-2 drives inside.  It rules.  Not 
insanely expensive either.  It was about $13k.  1.125 TB per tape stack.
We're running it with Veritas' Backup product on Windoze 2k.

Veritas seemed like the best choice, even though it runs on Windoze.
Why?  We get the web servers and file servers (which are all Linux)
through samba shares, and we also get Oracle & SQL Server agents that
work pretty well.  I've got cron jobs that run mysqldump, and drops the
backup files where the server can grab them from.  YMMV.  HTH.  HAND.

I'm working on getting the backup traffic off the production LAN though..
So, it's going to be secondary NICs && private addressing to create a b/u
network..

-- 
Jason Costomiris <><           |  Technologist, geek, human.
jcostom {at} jasons {dot} org  |  http://www.jasons.org/ 


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to