> -----Original Message-----
> From: Alan Mead [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 07 June, 2000 19:39
> To: Kraszewski, Marcin
> Subject: Re: ipchains MASQ and rlogind
>
>
> FWIW, telnet or, better, ssh work through IP Masq just fine.
I realise that, but, unfortunately, I have no control over the target
(HP-UX) servers - they don't have ssh installed - and our developers are
used to using eXceed xterm over rlogin (their scripts are set up that way),
so if there is a way to force rlogin connections to use a specific range of
source ports on the NAT, I would like to implement it. If not, they will
have to edit their scripts, but they are not going to like it (we have over
60 UNIX servers).
Marcin
> -Alan
>
> ----- Original Message -----
> From: Kraszewski, Marcin <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, June 07, 2000 10:53 AM
> Subject: ipchains MASQ and rlogind
>
>
> > I have a problem with getting rlogin connection from my
> private network
> > through a Linux NAT (MASQ) gateway. rlogind expects the
> connection to come
> > from a port in the range 512 through 1023, if it isn't, the
> connection is
> > aborted, but my NAT gateway assigns ports (in the trace I
> did) from the
> > range over 60,000. Is there any way to force connections to
> port 513 to be
> > from the privileged range (512-1023)? TIA.
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.