Hello listers,

I have been banging my head against a wall for the past week trying to set up an IP 
Masq box.  I've done this many times before including a recently configured box using 
RH 6.2.  It's always worked.  The problem:

I've configured eth0 (A 3Com 3c509) and ppp0 on the system.  When I boot the machine 
up, I can access all the machines in my network.  (192.168.1.x)  However, when I bring 
up ppp0, I can't access any machine on my LAN.  As soon as ppp0 is down, LAN access 
resumes.  I've poked around the system to see what could possibly be wrong.  I've 
re-installed three times.  Obviously, since I can't access the network, none of my 
clients are able to use the IP Masq box either.  I typed a 'route' command to see what 
is showing up there and I noticed, there is no default route when ppp0 is down.  When 
it is up, the default route is set to my ISPs portmaster.  I am certain this is 
related.  I tried forcing a static route to 127.0.0.1 before connecting, but ppp0 
creates an additional default route when it's up.

Additonal info:

I set up the following for IP Masq in /etc/rc.d/rc.local:

/sbin/ipchains -P forward DENY
/sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ
echo 1 > /proc/sys/net/ipv4/ip_forward

I don't think this is the problem because even with those line commented out in 
rc.local, LAN access goes away when ppp0 is up.

Anyone have any ideas what might be going on?  I've considered IRQ conflicts because I 
had a hell of a time trying to get the NIC and modem recognized without using PnP.  
The modem is on ttyS1 using IRQ 3 and I/O 2F8.  The NIC is using IRQ 5 and I/O 300.  
When I do a "cat /proc/interrupts" when ppp0 is down, IRQ 3 is not listed.  After I 
connect, IRQ 3 shows up.

Any help appreciated...

George Lenzer

BTW-I saw a web site once that had info on port forwarding for running certain IP 
programs behind a firewall.  They had info on getting Quake II servers running behind 
a firewall or programs like SpeakFreely.  I lost the link.  If this sounds familiar to 
anyone, please let me know.  Thanks a million...


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to