First off, I'd say check your cabling and connectors. I've seen this mostly
due to noise from loose connectors (on the board too due to faulty
soldering.) Swap cables if you can and see if the problem persists. If it
does example the NIC connector. You'll need a magnifying glass to check out
the solder on the connector.
If you have a poor solder connection, and if you have the skill, a light
touch with a SMALL (10W) soldering iron may fix it. If you doubt you have
the sign---DON'T! Buy another card, they're cheap.
Mike W
Wayne Dyer wrote:
>
> Recently I've noticed that one of my nics (D-Link tulip-based card)
> is showing a good number of errors, and all of them are indicated
> as carrier errors:
>
> Examples from ifconfig:
>
> TX packets:1483 errors:68 dropped:0 overruns:0 carrier:68
>
> I changed from the de4x5.o module to the tulip.o module, with no
> change. I'm thinking I've got a bad cable, which wouldn't surprise
> me.
>
> Any other thoughts?
>
> -W-
>
> Cheese is more valuable than old, hard milk.
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.