At 12:50 AM -0500 10/8/00, Steve Borho wrote:
>root (/) is on /dev/hda6 which is probably past the BIOS limit.
yep - that's why I had the /boot partition set up during the original
install... except I reckon that any /boot partitions being made
during setups by me in future will be (probably overkill - just to be
sure!) 20Mb or so!
>I don't know if lilo can boot from a vfat filesystem, but if it can I
>think you're best bet would be to put the new kernel on /dos.
>(use rpm2cpio to extract the files and move them into place manually,
>make sure you put the new modules in /lib/modules).
>
>Once you boot of the new kernel you can clean up /boot and copy the
>kernel there.
>
>very messy.
hmm... sounds scary - I think a trip out to the site on my scooter
over the weekend may be a safer proposition! :)
>You're other option is to try and move some of the files from /boot to
>see if you can make enough space, but this is both unlikely to work
>and also likely to make your box unbootable.
yeah - probably won't work anyway as RPM is complaining that 3MB
space is required on /boot for install of the kernel - and the
partition is only 2.4Mb or so anyway...
then again - I'm not really concerned about /dos - will happily wipe
it to avoid offsite trip - may be I could just reformat this
partition as /boottmp, then copy the boot stuff over, change
/etc/fstab to make /dev/hda2 /boot then restart and upgrade away...
hmm... again...
:)
--
Nitro - 3D Visualisation, Graphics & Animation
Ph (+61 2) 9810 5177 - Fx (+61 2) 9810 0199
http://www.nitro.com.au/
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list