Yes, that precisely was the case and I was about to write that I finally
could get it to work when I got your mail. Thank you very much guys..
--rezwanul
-----Original Message-----
From: Kevin Wood [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 21, 2000 3:52 PM
To: [EMAIL PROTECTED]
Subject: Re: [RHL] seeking help with software raid
This would point to the fact that the root=/dev/sdx is pointing to the
wrong device. You'll have to fix this in order to get it working. This
can be changed in /etc/lilo.conf. it should be something like
root=/dev/md0.
Good luck.
Kevin
"Kabir, Rezwanul" wrote:
>
> Hi Kirk and all
>
> Thanks for your suggestion. Yes, I had forgotten to include raid1.o
> module in the initrd.img in the bootdisk. It almost work now....
> It seems that now during the boot process it can create and start
the
> raid array. One of the arrays md0 contains the root filesystem. But near
the
> end I get kernel panic.
> The message that I get is as follows:
>
> Warning: Unable to open an initial console
> Kernel panic:No init found. Try passing init=option to kernel
>
> I would be immensely thankful if anybody can provide me with any
> suggestion.
> regards..
> --rezwanul
>
>
> -----Original Message-----
> From: Kirk [mailto:[EMAIL PROTECTED]]
> Sent: Friday, August 18, 2000 3:54 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [RHL] seeking help with software raid
>
> Does your boot floppy have an initrd.img that contains the raid(x).o
module
> you need to boot the raid partition?
>
> >At 03:31 PM 8/18/00 -0500, you wrote:
> >Hi
> > I'm trying to establish a software raid1 after installing linux
> >(redhat 6.2, kernel 2.2.14) in the first drive. I went to a certain
extent
> >but could not succeed completely.
> > Here is what I am doing..
> >
> > 1) Install linux in /dev/sda ( boot partition /dev/sda1, root
partition
> >/dev/sda5, swap /dev/sda6)
> > 2) fdisk the second drive (/dev/sdb) with the same size partitions as
> >/dev/sda but converted the type to 0xfd
> > 3) Create /etc/raidtab using failed_disk for /dev/sda1 and /dev/sda5..
> >
> > raiddev /dev/md0
> > .
> > .
> > device
> >/dev/sdb5
> > raid-disk 0
> > device
> >/dev/sda5
> > failed-disk 1
> >
> > reiddev /dev/md1
> > .
> > .
> > device
> >/dev/sdb1
> > raid-disk 0
> > device
> >/dev/sda1
> > failed-disk 1
> >
> > 4) mkraid /dev/md0
> > mkraid /dev/md1
> > I checked the devices in /proc/mdstat and they looked fine
> >
> > 5) mount /dev/md0 /mnt ; mount /dev/md1 /mnt/boot
> > 6) cp directories from / to /mnt except (proc,mnt)
> > 7) cd /mnt/etc; changed the fstab..
> > /dev/md0 / ext2 defaults 1 1
> > /dev/md1 /boot ext2 defaults 1 1
> >
> > 8) umount /mnt/boot; umount /mnt; raidstop /dev/md0 ; raidstop /dev/md1
> >
> > Everything went on fine till now. Then I tried to boot from a floppy
> with
> >root=/dev/md0
> > But the kernel panicked...
> >
> > I would be very grateful if anyone could help me out with this..
> > Thank you very much
> >
> > --rezwanul
> >
> >
> >
> >_______________________________________________
> >Redhat-list mailing list
> >[EMAIL PROTECTED]
> >https://listman.redhat.com/mailman/listinfo/redhat-list
> >
> >
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
--
Kevin Wood
Atipa Linux Solutions
850 East Industrial Park Drive
Suite 8
Manchester, NH 03109
P(603)622-7171 x 15
F(603)622-7272
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list